JetDielineWraparound label
Wraparound label for cylindrical bottles and cans: length from circumference (or diameter) plus overlap; the front viewing area and overlap are marked as annotation lines.
label.wrapView templateJETDIELINE / Templates
Wine and spirits
Bottles need correctly sized openings, separation and secure carrying. Compare carriers, dividers and rigid gift packaging. Test the full construction with filled bottles.
16Constructions, components and assemblies
Individual components are shown separately. Different sizes and stored template versions are not additional packaging shapes.
label.wrapExplore by packaging shape or application
Neck label
Neck label for a conical bottle neck as a cone development from top and bottom diameters and height; as a closed ring with overlap or a partial label.
label.neckView template
Magnetic closure box – tray (greyboard)
Greyboard tray with V-grooves and butt-jointed corners, with a round magnet recess centred in the front wall.
rigid.magnetic.trayView template
Magnetic closure box – tray wrap
Wrapping paper for the tray: cross shape with corner flaps and turn-ins; covers the magnet in the front wall.
rigid.magnetic.tray.wrapView template
Magnetic closure box – case (greyboard)
Greyboard hinged-lid case: base, spine with spine allowance, lid and front flap in one strip with V-grooves, round magnet recess in the flap.
rigid.magnetic.coverView template
Magnetic closure box – case wrap
Wrapping paper for the case: panel with turn-ins all round, corner cuts at 45° and creases at the joint positions.
rigid.magnetic.cover.wrapView template
Magnetic closure box – inside lining
Lining paper for the inside of the case, smaller all round by the margin; covers the turn-ins and flap magnet.
rigid.magnetic.cover.liningView template
Neck box – base (greyboard)
Greyboard shell for the neck box base: base panel with four walls, V-grooves and butt-jointed corners.
rigid.neck.baseView template
Neck box – base wrap
Wrapping paper for the neck box base: cross shape with corner flaps and turn-ins over the top edge inwards.
rigid.neck.base.wrapView template
Neck box – neck (greyboard)
Greyboard neck: surrounding strip with three V-grooves, joint at the rear right corner; sits in the base and protrudes above it by the neck height.
rigid.neck.neckView template
Neck box – neck wrap
Wrapping paper for the neck: strip with overlap at the joint and turn-ins at the top edge covering the inside down to the base.
rigid.neck.neck.wrapView template
Neck box – lid (greyboard)
Greyboard shell for the neck box lid; dimensions from the base inside dimension plus clearance, height from neck height plus clearance.
rigid.neck.lidView template
Neck box – lid wrap
Wrapping paper for the neck box lid in the same construction type as the base wrap.
rigid.neck.lid.wrapView template
Divider insert
Divider insert made from longitudinal and transverse strips with interlocking slots extending halfway down their height. All strips lie on a shared sheet and remain joined by holding nicks until separated.
corrugated.dividerView template
Bottle carrier
One-piece folding carton carrier for 4 or 6 bottles with two hole decks and a handle from the blank; with a divider as an assembly (carrier with divider), strips also separate the bottles below the deck.
carrier.bottleView template
Bottle carrier with divider
Bottle carrier for 4 or 6 bottles with a matching slotted divider. Two hole decks and the carrying handle hold the bottles in the carrier; additional strips also separate them below. The divider is derived from the internal space and selected bottle count.
carrier.bottle.dividerView templateNo matching template. Change the search or application.
Your product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app