JetDielineButt joint gap
Walls placed between the long walls are shorter by this value at each joint to prevent jamming during erection.
Rigid boxes / JETDIELINE
Neck box – lid (greyboard)
Greyboard shell for the neck box lid; dimensions from the base inside dimension plus clearance, height from neck height plus clearance.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
rigid.neck.lid- Component
- Rigid boxes
- Current template version
- V1
- Dieline preview version
- V1
This template is a component of a packaging assembly. Match its dimensions to the other parts; lids, bases, wraps and linings serve different purposes.
How it is assembled
Erect the greyboard at the grooves: first front and rear walls, then place the end walls between them. Secure corners with corner tape, then wrap. Place the wrapped lid over the neck onto the base.
Material and grain direction
Grain direction of greyboard and wrapping paper parallel to the blank's x-axis: the long grooves fold cleanly, and board and paper do not warp against each other during lamination (check with the box manufacturer).
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Bottles need correctly sized openings, separation and secure carrying. Compare carriers, dividers and rigid gift packaging. Test the full construction with filled bottles.
Dimensions of the illustrated example
151 × 101 × 20.5 mm15.1 × 10.1 × 2.05 cm5.94 × 3.98 × 0.81 in / ″
Length: 151 mmWidth: 101 mmHeight: 20.5 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Frequently asked questions
Why is the neck strip 80 mm high?
The 20 mm neck height describes the protrusion above the base, not the entire strip height. With a base inside height of 60 mm, this produces an 80 mm neck strip. It reaches down to the base and is glued to its inside walls. Check actual seating after wrapping; adhesive application and turn-ins can affect support.
How does this lid differ from a telescopic lid?
The neck box lid fits over the wrapped neck and rests on the base. It therefore does not need to fit over the entire base outside dimension. The model derives its inside dimensions from the base inside dimension and clearance. A lid from the lid and base box uses a different relationship and cannot be adopted unchanged.
Why is the neck cross-section smaller than the base interior?
The base contains wrapping paper, and the neck is also wrapped. The model therefore subtracts four paper thicknesses from the base inside dimension before determining the neck's outside cross-section. Two board thicknesses are also subtracted for the neck interior. With different paper, the whole assembly must be recalculated; check installation with the actual wrapped parts.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Neck box – lid wrap
Wrapping paper for the neck box lid in the same construction type as the base wrap.
rigid.neck.lid.wrapView template
Neck box – base (greyboard)
Greyboard shell for the neck box base: base panel with four walls, V-grooves and butt-jointed corners.
rigid.neck.baseView template
Neck box – base wrap
Wrapping paper for the neck box base: cross shape with corner flaps and turn-ins over the top edge inwards.
rigid.neck.base.wrapView template
Neck box – neck (greyboard)
Greyboard neck: surrounding strip with three V-grooves, joint at the rear right corner; sits in the base and protrudes above it by the neck height.
rigid.neck.neckView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app