Corrugated shipping boxes / JETDIELINE

Telescope box – lid

Corrugated lift-off lid with the same construction as the base; its dimensions follow the outside dimensions of the base plus clearance per side.

Telescope box – lid — Dieline preview of the documented example. Set the dimensions and production material in JetDieline.

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: corrugated.telescope.lid
Component: Corrugated shipping boxes
Current template version: V1
Dieline preview version: V1

This template is a component of a packaging assembly. Match its dimensions to the other parts; lids, bases, wraps and linings serve different purposes.

How it is assembled

Erect front and back walls, fold corner flaps inwards, erect end walls and glue them to the corner flaps. Place the lid upside down over the base.

Material and grain direction

Grain direction vertical on the blank (check)

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Choose a box for your packing process, protection needs and closure. Inserts and dividers complete the inside space. Test the full shipping pack with the product, cushioning and intended transport.

Dimensions of the illustrated example

316 × 210 × 40 mm

31.6 × 21 × 4 cm12.44 × 8.27 × 1.57 in / ″

Length: 316 mmWidth: 210 mmHeight: 40 mm

Inside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Flap gap

Gap between adjacent flaps or walls; at least approximately material thickness.

Ear length (ratio)

Length of ears or corner flaps as a proportion of half the inside width.

Frequently asked questions

Why does the lid have different dimensions from the base?

The lid must fit over the base's outside walls. Its inside cross-section is therefore the base's outside dimension plus twice the clearance per side. The starting example in B flute gives 312 × 206 mm outside at the base and, with 2 mm clearance per side, 316 × 210 mm inside at the lid.

Are the base and lid a single blank?

No. Each component has its own blank, parameters and figures. On this page, the illustrations appear in sequence; the first set of figures belongs to the base, the second to the lid. Components can be documented together in the assembly export. Do not mix up their dimensions when printing or cutting the sample.

Can I use crease-to-crease dimensions?

These two component templates support inside and outside dimensions. Crease-to-crease dimensions are not offered for the glued corners because the end wall and corner flap overlap and the reference is ambiguous. Choose the reference before calculation. For lid fit, you need the calculated outside dimension of the base.