Paper products and custom contours / JETDIELINE

Presentation folder with pocket

Folder with front and back covers, spine and pocket on the right, left or both sides; pockets have glue flaps on both sides and optional business card slots. Dimensions refer to the finished format of the closed folder.

Office and storage

Presentation folder with pocket — Dieline preview of the documented example. Set the dimensions and production material in JetDieline.

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: folder.pocket
Construction: Paper products and custom contours
Current template version: V1
Dieline preview version: V1

How the shape is constructed

Front and back covers connect through the spine. In the starting example, a pocket sits on the right cover. Left or double-sided pockets are selectable. Each pocket has side glue flaps; its top edge can be lowered towards the spine.

How it is assembled

Fold each pocket’s glue flaps inwards and apply glue to their outside, fold the pocket at its crease onto the inside of the cover and press down. Finally close the folder along the spine creases.

Material and grain direction

Grain direction vertical on the blank (check)

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Dimensions of the illustrated example

220 × 310 mm

22 × 31 cm8.66 × 12.2 in / ″

Width: 220 mmHeight: 310 mm

Outside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Spine width

Distance between the two spine creases and thus the folder’s filling depth; 0 produces a single fold.

Pockets

Pocket position in the open folder: right (on the back cover), left (on the front cover) or both sides.

Pocket height

Pocket height at the outer edge from the pocket crease; no more than half the folder height.

Pocket slope

Amount by which the pocket is lower on the spine side than at the outer edge (sloping pocket edge); no more than half the pocket height.

Glue flap

Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.

Frequently asked questions

Does 220 × 310 mm describe the open folder?

No. It is the finished format of the closed folder. Front and back covers, spine and pocket together form a larger blank. In the starting example, it is 456 × 410 mm. Plan artwork using the individual cover and pocket panels rather than treating the closed format as the whole sheet.

Can the pocket be on the left or both sides?

Yes. folderPockets offers right, left and both. Right means on the back cover of the open folder, left on the front cover. Both pockets have their own glue flaps. The selection changes blank and assembly. After switching, also check print placement and room for the contents.

What happens with zero spine width?

folderSpine set to 0 produces a single centre crease instead of a spine with two creases. This provides a different structure under the same folder ID. It does not establish whether your documents have enough space. Check the filled folder and choose a spine suited to the actual contents.