Corrugated shipping boxes / JETDIELINE

Regular slotted container

The regular slotted container combines four walls, a glue flap and four flaps each at top and bottom. Outer flaps meet in the middle; the reference is similar to FEFCO 0201.

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: corrugated.rsc
Construction: Corrugated shipping boxes
Current template version: V1
Dieline preview version: V1

How the shape is constructed

The glue flap joins the walls into a body. For filling, close the inner bottom flaps first, then the outer ones. Adhesive tape holds the bottom and later the lid together.

How it is assembled

Glue or stitch the glue flap to the opposite wall and lay the box flat. To fill, erect it, fold in the inner bottom flaps, close the outer flaps over them and seal with tape; do the same at the top.

Material and grain direction

Grain direction parallel to height (check)

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Dimensions of the illustrated example

300 × 200 × 150 mm

30 × 20 × 15 cm11.81 × 7.87 × 5.91 in / ″

Length: 300 mmWidth: 200 mmHeight: 150 mm

Inside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Glue flap

Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.

Glue flap angle

Bevel at the ends of the glue flap; aids folding and erection.

Flap gap

Gap between adjacent flaps or walls; at least approximately material thickness.

Frequently asked questions

What does similar to FEFCO 0201 mean?

The reference classifies construction for guidance. It is neither a reproduced standard drawing nor proof of confirmed classification. This page shows our own parametric construction. A technical partner must confirm the relationship before a binding reference is made; public wording therefore remains “similar”.

Do the outer flaps meet in the middle?

Yes, this construction designs the outer flaps for a central closure. Other catalogue types handle full or partial overlap separately. Material thickness and flap gap affect the result. Check the closed bottom and lid on a sample; the calculated blank alone does not confirm tape fit.

Which dimension reference should I use?

The catalogue example uses inside dimensions. They describe the intended space for product and cushioning. Outside and crease-to-crease dimensions are also supported references. Record the selected reference at handover. After changing flute, crease allowance and finished fit must be checked again.