Corrugated shipping boxes / JETDIELINE

Slotted box

The slotted box combines four walls, a glue flap and four flaps each at the top and bottom. Its outer flaps meet in the middle; the reference is similar to FEFCO 0201.

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: corrugated.rsc
Construction: Corrugated shipping boxes
Current template version: V1
Dieline preview version: V1

How the shape is constructed

The glue flap closes the walls into a body. For filling, the inner bottom flaps are closed first, followed by the outer ones. Adhesive tape holds the bottom and later the lid together.

How it is assembled

Glue or stitch the glue flap to the opposite wall and lay the box flat. For filling, erect it, fold in the inner bottom flaps, close the outer flaps over them and seal with adhesive tape; repeat at the top.

Material and grain direction

Grain direction parallel to height (check)

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Dimensions of the illustrated example

300 × 200 × 150 mm

30 × 20 × 15 cm11.81 × 7.87 × 5.91 in / ″

Length: 300 mmWidth: 200 mmHeight: 150 mm

Inside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Glue flap

Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.

Glue flap angle

Angled ends of the glue flap; make folding and erection easier.

Flap gap

Gap between adjacent flaps or walls; at least about the material thickness.

Frequently asked questions

What does similar to FEFCO 0201 mean?

The indication classifies the construction for orientation. It is not a reproduction of a standard drawing or proof of a confirmed classification. This page shows the custom parametric construction. Before a binding reference is stated, a specialist partner must confirm the relationship; the public wording therefore remains “similar to”.

Do the outer flaps meet in the middle?

Yes, this construction designs the outer flaps for a central closure. Other catalogue types handle full or partial overlap separately. Material thickness and flap gap affect the result. Check the closed bottom and lid on the sample; the calculated blank alone does not confirm how the tape sits.

Which dimension reference do I use?

The catalogue example uses the inside dimension. It describes the intended space for the product and cushioning. Outside dimension and crease-to-crease dimension are also supported references. Record the selected reference when passing on the files. If the flute changes, crease allowance and finished fit must be checked again.