Carriers and pallet displays / JETDIELINE

Bottle carrier with divider

Bottle carrier for 4 or 6 bottles with a matching slotted divider. Two hole decks and the carrying handle hold the bottles in the carrier; additional strips also separate them below. The divider is derived from the internal space and selected bottle count.

Bottle carrier with divider — Contours of the matching parts from the same assembly example, shown at the same scale. Set their dimensions and material together in JetDieline.

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: carrier.bottle.divider
Assembly: Carriers and pallet displays
Current template version: V1
Dieline preview version: V1

How it is assembled

Erect and glue the carrier, interlock the divider strips and insert them below the decks. Place the intended bottles in a sample and check clearance, bottom support and carrying handle together. Material and construction must suit the actual filled weight.

Material and grain direction

Grain across the creases (vertical on the blank), as for the cup carrier (verify with the test printer).

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Compare labels, cup carriers and bottle packaging. Circumference and openings must fit the container. Print mockups of beverage cartons do not demonstrate liquid-tightness.

Dimensions of the illustrated example

235 × 175 × 100 mm

23.5 × 17.5 × 10 cm9.25 × 6.89 × 3.94 in / ″

Length: 235 mmWidth: 175 mmHeight: 100 mm

Inside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

Parts of this assembly

Bottle carrier ↗

Fold up the front and back wall, fold both hole decks inward to the middle, raise and glue the handle halves. With divider: slot the strips together and place them on the base before closing the decks. Insert the bottles from above.

Divider insert ↗

Separate the strips along the separation lines. Turn over the transverse strips (slots downwards) and slot them over the longitudinal strips until the slot bottoms meet; place the partition in the box.