JetDielineBack wall height above the side walls
Back wall header above the side wall height; display advertising area.
Trays and displays / JETDIELINE
Counter display
Open display for the shop counter: low front wall with finger recess, tall back wall with advertising area, sloping side walls; corners are glued inside with corner glue flaps as on the tray.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
carton.display.counter- Construction
- Trays and displays
- Current template version
- V2
- Dieline preview version
- V1
How the shape is constructed
A base joins the low front wall, tall back wall with header and trapezoidal side walls. Corner glue flaps join the walls. The optional front cut-out makes the goods easier to access.
How it is assembled
Erect front and back walls, fold the corner glue flaps inwards and apply adhesive to their outside. Erect side walls and press against the flaps. Insert goods; the back wall shows the advertising area.
Material and grain direction
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
250 × 150 × 100 mm25 × 15 × 10 cm9.84 × 5.91 × 3.94 in / ″
Length: 250 mmWidth: 150 mmHeight: 100 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Front wall height
Inside height of the front wall; the side walls rise from it to the height at the back wall.
Front cut-out
Round finger recess centred in the front wall's top edge for easy removal of goods.
Front cut-out radius
Radius and depth of the finger recess; a bridge remains above the bottom and towards the corners.
Corner glue flap
Width of the glue flaps at the ends of the front and back walls, which are glued to the inside of the end walls. The material requires a minimum width; flaps from both sides must not meet on the end wall.
Frequently asked questions
Which height does the inside dimension refer to?
The third input is the construction's base height. The low front wall has its own parameter, as does the back wall height above the side walls. The header is therefore not simply the third input. In the starting run, base height is 100 mm, front wall height 40 mm and additional back wall height 120 mm.
How are the corners joined?
Front and back walls have corner glue flaps. The side walls are pressed against the adhesive-coated flaps. There is no locking closure like that of the tray with interlocking corners. Glue flap width and angle must suit wall and gap. Check erection and curing with the intended adhesive before loading the display with goods.
Can I remove the front cut-out?
The frontCutout switch starts enabled and can be disabled. The radius is only needed for an enabled cut-out. When enabled, the cut-out's width and depth must fit the front wall. A geometrically valid radius does not describe removal force; test access with the actual product and its packing arrangement.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Carton tray with glued corners
A base, four walls and glued corners form the open folding tray. The page shows V2 with an optional window; the window remains switched off in the starting example.
carton.tray.gluedView template
Carton tray with interlocking corners
Unglued tray made from folding boxboard: front and back walls with corner flaps, double end walls with a return; tabs on the inner wall tuck into slots in the bottom.
carton.tray.lockedView template
Dispenser carton with tear-out window
Reverse tuck-end carton with a perforated tear-out window on the front and a thumb notch as a tear tab; after opening, the contents are removed individually.
carton.dispenserView template
Shelf display (shelf-ready tray)
Shipping and shelf packaging in one: tray with four walls of equal height and glued corners, a U-shaped tear-off perforation with a thumb notch in the front wall. After tearing off, a low front and side lands remain; optional header on the back wall (straight, rounded or arched). Starting material B-flute.
carton.display.shelfView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app