Folding cartons and inserts / JETDIELINE

Telescope box (folding carton)

Base and telescope lid in folding boxboard form one assembly. Both parts have glued corner flaps; the lid follows the outside dimensions of the base plus clearance per side. For gift and chocolate boxes.

Telescope box (folding carton) — Contours of the matching parts from the same assembly example, shown at the same scale. Set their dimensions and material together in JetDieline.

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: carton.telescope
Assembly: Folding cartons and inserts
Current template version: V1
Dieline preview version: V1

How it is assembled

Pre-break the base and lid separately and glue their corner flaps. Once dry, fit the lid and check clearance on a sample; material thickness changes the outside dimensions of the base.

Material and grain direction

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Compare opening and presentation: pillow shapes, bands, drawers or lift-off lids. Plan the fit of contents and inserts and allow clearance between moving parts.

Dimensions of the illustrated example

150 × 100 × 50 mm

15 × 10 × 5 cm5.91 × 3.94 × 1.97 in / ″

Length: 150 mmWidth: 100 mmHeight: 50 mm

Inside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

Parts of this assembly

Telescope box (folding carton) – base ↗

Base: erect front and back walls, fold corner flaps inwards, erect end walls and glue them to the corner flaps. Lid: erect front and back walls, fold corner flaps inwards, erect end walls and glue them to the corner flaps. Place the lid upside down over the base.