JetDielineGlue flap
Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Folding cartons / JETDIELINE
Straight tuck-end box
Blank, creases and flaps are calculated from inside dimensions. The results are artwork PDF, production dieline and production sheet for the printer.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
carton.tuckend.straight- Construction
- Folding cartons
- Current template version
- V3
- Dieline preview version
- V2
How the shape is constructed
From left to right: glue flap, left side, front, right side and back. Both tuck flaps are on the front. Dust flaps are on the sides.
How it is assembled
Pre-fold the blank along all creases. Glue the glue flap to the inside of the opposite wall and lay the box flat. To fill, erect it, fold in dust flaps and insert tuck flaps.
Material and grain direction
Grain direction parallel to height (check)
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
55 × 55 × 125 mm5.5 × 5.5 × 12.5 cm2.17 × 2.17 × 4.92 in / ″
Length: 55 mmWidth: 55 mmHeight: 125 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Glue flap angle
Bevel at the ends of the glue flap; aids folding and erection.
Tuck depth
How deeply the tuck flap enters the box; at most about half the width (height for a mailer).
Tuck flap radius
Corner radius of the tuck flap; limited by half the flap width or tuck depth.
Tuck flap shoulder
Side inset of the tuck flap relative to the lid for easy insertion.
Frequently asked questions
What is the difference between straight and reverse?
In a straight tuck-end box, both tuck flaps are on the front. In the reverse construction, the bottom flap is on the back. This changes closure and the reading direction of individual panels. Check artwork and filling workflow on the appropriate construction.
What inside dimensions do I need for a 50-ml jar?
Fill volume does not determine the jar's outside dimensions. Measure diameter and total height including closure. Required clearance depends on insertion, material and a possible insert. Finished inside dimensions cannot be stated without this information; confirm them on a sample.
How large must the glue flap be?
Parameter range and starting value are in the table. The material profile's minimum also matters. Adhesive, production workflow and material can impose further requirements. MFG-001 flags a narrow glue flap; confirm final width with your printer.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Reverse tuck-end box
The top tuck flap sits on the front, the bottom one on the back. The reverse tuck-end carton calculates its walls, dust flaps and closures from the inside dimension. The dieline shown comes from version 3 with the hanging hole disabled; artwork, production dieline and production sheet can be exported together in the technical core.
carton.tuckend.reverseView template
Folding carton with crash-lock bottom
The pre-glued crash-lock bottom closes when the body is erected. Dust flaps and a tuck flap close the folding carton at the top; bottom gluing belongs to the production workflow.
carton.crashlockView template
Folding carton with snap-lock bottom
The snap-lock bottom closes with four interlocking flaps. Two side flaps sit inside; a nose on the back tucks under the front flap's tongue. Version 1 combines this bottom with a tuck lid. The calculation example uses folding carton board 400 g/m² and shows the flat dieline with creases and bottom cuts.
carton.snaplockView template
Tuck end carton with window
The window carton combines straight tuck closures with a cut-out in the front. Choose a rectangle with corner radius or an oval and leave room for the film margin and bridges. Version 2 shown here starts with a rectangular window and no hanging hole. The dieline provides the construction; window film is attached separately behind the window.
carton.windowView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app