JetDielineGlue flap
Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Folding cartons / JETDIELINE
Straight tuck-end carton
Blank, creases and flaps are calculated from inside dimensions. The outputs are artwork PDF, production dieline and report for the printer.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
carton.tuckend.straight- Construction
- Folding cartons
- Current template version
- V3
- Dieline preview version
- V2
How the shape is constructed
From left to right come the glue flap, left side, front, right side and back. Both tuck flaps sit on the front. The dust flaps are on the sides.
How it is assembled
Pre-break the blank along all creases. Glue the glue flap to the inside of the opposite wall and lay the box flat. For filling, erect it, fold in the dust flaps and insert the tuck flaps.
Material and grain direction
Grain direction parallel to height (check)
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
55 × 55 × 125 mm5.5 × 5.5 × 12.5 cm2.17 × 2.17 × 4.92 in / ″
Length: 55 mmWidth: 55 mmHeight: 125 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Glue flap angle
Angled ends of the glue flap; make folding and erection easier.
Tuck depth
How far the tuck flap extends into the box; at most about half the width (the height for a mailer).
Tuck flap radius
Corner radius of the tuck flap; limited by half the flap width or tuck depth.
Tuck flap shoulder
Side inset of the tuck flap relative to the lid, to allow easy insertion.
Frequently asked questions
What is the difference between straight and reverse?
On the straight tuck-end carton, both tuck flaps sit on the front. In the reverse construction, the lower flap sits on the back. This changes the closure and reading direction of individual panels. Check the artwork and filling workflow on the appropriate construction.
Which inside dimension do I need for a 50-ml jar?
The fill volume does not determine the jar's outside dimensions. Measure the diameter and total height including the closure. Required clearance depends on insertion, material and any insert. A finished inside dimension cannot be stated without this information; confirm it on the sample.
How large must the glue flap be?
The parameter range and starting value appear in the table. The minimum in the material profile is also decisive. Adhesive, production workflow and material may impose further requirements. MFG-001 flags a glue flap that is too narrow; confirm the final width with your printer.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Reverse tuck-end carton
The top tuck flap sits on the front, the bottom one on the back. The reverse tuck-end carton calculates its walls, dust flaps and closures from the inside dimension. The dieline shown comes from version 3 with the hanging hole disabled; artwork, production dieline and report can be exported together in the technical core.
carton.tuckend.reverseView template
Folding carton with crash-lock bottom
The pre-glued crash-lock bottom closes as the body is erected. At the top, dust flaps and a tuck flap close the folding carton; gluing the bottom is part of the production workflow.
carton.crashlockView template
Folding carton with snap-lock bottom
The snap-lock bottom closes with four interlocking flaps. Two side flaps sit inside; a nose on the back tucks under the front flap's tongue. Version 1 combines this bottom with a tuck lid. The calculation example uses folding carton board 400 g/m² and shows the flat dieline with creases and bottom cuts.
carton.snaplockView template
Tuck-end carton with window
The window carton combines straight tuck closures with a cut-out in the front. Choose a rectangle with corner radius or an oval and leave room for the film margin and bridges. Version 2 shown here starts with a rectangular window and no hanging hole. The dieline provides the construction; window film is attached separately behind the window.
carton.windowView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app