Regular slotted container, similar to FEFCO 0201

Structure and use

The regular slotted container forms a rectangular body from a wall strip. A glue flap connects the sides. Upper and lower flaps close the box.

You enter dimensions with a clear reference. The structure calculates creases and flaps, accounting for the selected material profile. Corrugated board needs an appropriate approach to thickness and allowance. A digital result does not replace an assembled prototype.

Our template

Glue flap and flap gap are among the parameters. Starter profiles for E-, B- and C-flute are available.

The template does not reproduce a standard drawing. An external reference classification and production approval are unconfirmed.

Differences and pending confirmation

The reference is entered in the catalogue. This does not imply confirmed compliance in every detail. Custom parameters and material allowance may differ. We therefore show the reference exclusively as “similar to”.

Flaps, slots and material behaviour must be checked against the target material. Statements about fit remain starting values, not a guarantee.

The bundled material profiles are starting values and not calibrated. The app flags this with a finding of its own.

Reference information for orientation. No standard texts or drawings are reproduced. Our structures are original parametric templates; a reference indication does not confirm compliance with a standard.

For handoff

Check the sheet format with the manufacturability check and the layout with the up calculation. The printer receives separate production files as well as the report and manifest. An approval documents the status; it does not replace expert review.