JetDielineGlue flap
Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Corrugated components and inserts / JETDIELINE
Full overlap slotted container
The outer flaps each cover the entire opening at the top and bottom and lie on top of each other. This custom corrugated construction calculates full coverage rather than just a narrow overlap strip.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
corrugated.rsc.fulloverlap- Construction
- Corrugated components and inserts
- Current template version
- V1
- Dieline preview version
- V1
How the shape is constructed
Four wall panels and a glue flap form the box body. The inner flaps are folded in first; the rear outer flap then lies beneath the front outer flap. This construction is repeated at the top and bottom. Double coverage is part of the dimension model, not an additional size variant.
How it is assembled
Glue or staple the glue flap to the opposite wall. Erect for filling, fold in the inner bottom flaps, place the rear outer flap over them first, then the front outer flap, and glue across the surface, staple or tape; repeat at the top.
Material and grain direction
Grain direction parallel to the height (check)
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
400 × 200 × 200 mm40 × 20 × 20 cm15.75 × 7.87 × 7.87 in / ″
Length: 400 mmWidth: 200 mmHeight: 200 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Glue flap angle
Angle at the ends of the glue flap; makes folding and erection easier.
Flap gap
Gap between adjacent flaps or walls; at least about the material thickness.
Frequently asked questions
What overlaps fully on this slotted container?
The front and rear outer flaps each cover the entire opening. They lie on top of each other over the previously folded-in inner flaps. This applies at the top and bottom. A narrow overlap strip is a different construction with its own parameter; this template shows full coverage.
Can I reduce the overlap to 50 mm?
For this ID, full coverage is fixed in the construction model. It has no parameter for a narrower strip. Use the slotted container with overlapping outer flaps for adjustable overlap. Do not change the contour by simply scaling or trimming it; this would lose the documented construction status.
Which outer flap is on the outside?
The assembly instructions place the rear outer flap over the bottom or lid first, followed by the front flap. The front flap is therefore the last layer closed. Check reading direction and obscured artwork on a marked sample, especially if both flaps are printed.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Folding tray with interlocking corners
An open corrugated tray with double end walls and interlocking corners. The blank is erected without adhesive; this page shows the custom V2 construction with B flute.
corrugated.trayView template
Telescope box – base
Base and lid form a two-piece corrugated construction with glued corner flaps. Both components have their own dieline; the lid is derived from the base's outside dimension and clearance on each side.
corrugated.telescope.baseView template
Half slotted container
Four walls with a glue flap and bottom flaps, open top: the half slotted container can be used as a shelf box or base. The custom parametric construction calculates only this open box body.
corrugated.halfslottedView template
Overlap slotted container
An adjustable strip connects the outer flaps at the top and bottom. The template calculates flap lengths, material layers and blank from the box dimensions and desired overlap.
corrugated.rsc.overlap.outerView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app