JetDielineGlue flap
Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Corrugated components and inserts / JETDIELINE
Half slotted container
Four walls with a glue flap and bottom flaps, open top: the half slotted container can be used as a shelf box or base. The custom parametric construction calculates only this open box body.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
corrugated.halfslotted- Construction
- Corrugated components and inserts
- Current template version
- V1
- Dieline preview version
- V1
How the shape is constructed
The wall sequence is closed into a tube using the glue flap. At the bottom, short inner flaps lie beneath the outer flaps; at the top, all walls end at a straight cut edge. A separate lid is not part of this template. Height describes wall height in the chosen dimension reference.
How it is assembled
Glue or staple the glue flap to the opposite wall and flatten the box. Erect for filling, fold in the inner bottom flaps, close the outer flaps over them and seal with tape; the top stays open.
Material and grain direction
Grain direction parallel to the height (check)
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
300 × 200 × 150 mm30 × 20 × 15 cm11.81 × 7.87 × 5.91 in / ″
Length: 300 mmWidth: 200 mmHeight: 150 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Glue flap angle
Angle at the ends of the glue flap; makes folding and erection easier.
Flap gap
Gap between adjacent flaps or walls; at least about the material thickness.
Frequently asked questions
Does the half slotted container have a lid?
No. The top edge remains open; lid flaps are entirely absent. A separate telescopic lid must be designed to fit and checked. This template does not calculate its fit automatically. For a jointly calculated two-part construction, the telescopic box provides a base and lid with their own assembly relationship.
How is the bottom closed?
After erection, the inner flaps are folded in and the outer flaps closed over them. The assembly instructions specify sealing the bottom with tape. The side seam is glued or stapled beforehand. Check closure and wall alignment on the filled sample; a valid contour is not proof of a specific fill weight.
Can flapGap be zero?
The parameter range starts at 0 mm; this corresponds to a knife cut. However, the material-dependent constraint requires room for the thickness at the flap corner. The parameter range alone therefore does not permit every combination. The machine's minimum dimension must also suit the chosen bottom closure.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Folding tray with interlocking corners
An open corrugated tray with double end walls and interlocking corners. The blank is erected without adhesive; this page shows the custom V2 construction with B flute.
corrugated.trayView template
Telescope box – base
Base and lid form a two-piece corrugated construction with glued corner flaps. Both components have their own dieline; the lid is derived from the base's outside dimension and clearance on each side.
corrugated.telescope.baseView template
Full overlap slotted container
The outer flaps each cover the entire opening at the top and bottom and lie on top of each other. This custom corrugated construction calculates full coverage rather than just a narrow overlap strip.
corrugated.rsc.fulloverlapView template
Overlap slotted container
An adjustable strip connects the outer flaps at the top and bottom. The template calculates flap lengths, material layers and blank from the box dimensions and desired overlap.
corrugated.rsc.overlap.outerView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app