JetDielineGlue flap
Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Corrugated shipping boxes / JETDIELINE
Regular slotted container
The regular slotted container combines four walls, a glue flap and four flaps each at the top and bottom. Its outer flaps meet in the centre; the reference is similar to FEFCO 0201.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
corrugated.rsc- Construction
- Corrugated shipping boxes
- Current template version
- V1
- Dieline preview version
- V1
How the shape is constructed
The glue flap closes the walls into a sleeve. For filling, the inner bottom flaps close first, followed by the outer ones. Tape holds the bottom and later the lid together.
How it is assembled
Glue or stitch the glue flap to the opposite wall and lay the box flat. Erect for filling, fold in the inner bottom flaps, close the outer flaps over them and seal with tape; do the same at the top.
Material and grain direction
Grain direction parallel to the height (check)
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
300 × 200 × 150 mm30 × 20 × 15 cm11.81 × 7.87 × 5.91 in / ″
Length: 300 mmWidth: 200 mmHeight: 150 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Glue flap angle
Angle at the ends of the glue flap; makes folding and erection easier.
Flap gap
Gap between adjacent flaps or walls; at least about the material thickness.
Frequently asked questions
What does similar to FEFCO 0201 mean?
The reference classifies the structure for orientation. It neither reproduces a standard drawing nor demonstrates a confirmed classification. This page shows the original parametric structure. Before a definitive reference can be given, a specialist partner must confirm the relationship; the public wording therefore remains “similar to”.
Do the outer flaps meet in the centre?
Yes, this structure designs the outer flaps for a central closure. Other catalogue types address full or partial overlap separately. Material thickness and flap gap affect the result. Check the closed bottom and lid on a sample; the calculated blank alone does not confirm the tape's fit.
Which dimension reference do I use?
The catalogue example uses inside dimensions. They describe the intended space for the product and cushioning. Outside and crease-to-crease dimensions are also supported references. Record the selected reference when passing files on. If the flute changes, crease allowance and finished fit must be checked again.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Mailer box
Shipping box with a tuck lid and dust flaps made from E-flute or microflute board. Inside printing, double walls and size series are part of the same structure.
corrugated.mailerView template
Full overlap slotted container
The outer flaps each cover the entire opening at the top and bottom and lie on top of each other. This custom corrugated construction calculates full coverage rather than just a narrow overlap strip.
corrugated.rsc.fulloverlapView template
Slotted container with snap-lock bottom
A snap-lock bottom closes this corrugated box without tape at the bottom. The top can be chosen separately: meeting flaps, fully overlapping flaps or open.
corrugated.rsc.mixedView template
Overlap slotted container
An adjustable strip connects the outer flaps at the top and bottom. The template calculates flap lengths, material layers and blank from the box dimensions and desired overlap.
corrugated.rsc.overlap.outerView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app