Labels and bands / JETDIELINE

Round label

Circular label; diameter is both width and height.

Template ID: label.round
Construction: Labels and bands
Current template version: V1
Dieline preview version: V1

How the shape is constructed

The circle consists of a closed cut contour and one panel. Width and height must have the same diameter. A separate corner radius is not permitted for the circle. The construction creates no crease; safe zone and bleed around the circle are derived from the production profile.

How it is assembled

Remove the label from the backing material and apply from the centre outwards without bubbles.

Material and grain direction

No fixed grain direction; check parallel to the body axis on curved bodies

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Dimensions of the illustrated example

50 × 50 mm

5 × 5 cm1.97 × 1.97 in / ″

Width: 50 mmHeight: 50 mm

Outside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

Frequently asked questions

Which dimension do I enter for a round label?

Enter the diameter as width and height. Both values must be equal; in the example, each is 50 mm. Corner radius remains 0. Diameter describes the cut edge; bleed and safe zone are additional settings in the production profile.

Can I create an oval with two different dimensions?

No. The round template explicitly checks that width equals height and stops if values differ. Choose the oval label for an elliptical contour. This keeps template ID and geometric structure traceable in the report too.

How is a round label arranged on the backing sheet?

Use the label sheet template with round label shape and equal label width and height. Rows, columns and spacing come from its sheet dimension model. The single circular label does not calculate an arrangement of multiple labels itself.