JetDielineFlap gap
Gap between adjacent flaps or walls; at least about the material thickness.
Folding cartons and inserts / JETDIELINE
Telescopic box (folding carton) – lid
Telescopic lid made from folding carton board in the same design as the base; dimensions from the base's outside dimension plus clearance on each side.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
carton.telescope.lid- Component
- Folding cartons and inserts
- Current template version
- V1
- Dieline preview version
- V1
This template is a component of a packaging assembly. Match its dimensions to the other parts; lids, bases, wraps and linings serve different purposes.
How it is assembled
Erect front and back walls, fold corner flaps inwards, erect end walls and glue them to the corner flaps. Place the lid upside down over the base.
Material and grain direction
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Compare opening and presentation: pillow shapes, bands, drawers or lift-off lids. Plan the fit of contents and inserts and allow clearance between moving parts.
Dimensions of the illustrated example
154 × 103 × 20 mm15.4 × 10.3 × 2 cm6.06 × 4.06 × 0.79 in / ″
Length: 154 mmWidth: 103 mmHeight: 20 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Ear length (ratio)
Length of the ears or corner flaps as a proportion of half the inside width.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Telescope box (folding carton)
Base and telescope lid in folding boxboard form one assembly. Both parts have glued corner flaps; the lid follows the outside dimensions of the base plus clearance per side. For gift and chocolate boxes.
carton.telescopeView template
Telescopic box (folding carton) – base
Lower part of the telescopic box made from folding carton board: base with four walls and glued corner flaps, same design as the corrugated telescopic box, for smaller gift and chocolate boxes.
carton.telescope.baseView template
Seal-end carton
Folding carton with a side seam and glued closures at the top and bottom (Seal End) instead of tuck flaps: outer flap on the front, inner flap on the back, dust flaps on the sides. For pharmaceutical and food products; opened by tearing.
carton.sealendView template
Tissue box
Horizontal box for facial tissues and handkerchiefs: body with side seam, glued end closures (Seal End), perforated dispensing opening in the top (oblong slot or rectangle) with thumb notch. Dimensions: length × top width × height.
carton.tissueView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app