JetDielineSlotted box
The slotted box combines four walls, a glue flap and four flaps each at the top and bottom. Its outer flaps meet in the middle; the reference is similar to FEFCO 0201.
corrugated.rscView templateJETDIELINE / Templates
Shipping
Choose a box for your packing process, protection needs and closure. Inserts and dividers complete the inside space. Test the full shipping pack with the product, cushioning and intended transport.
26Constructions, components and assemblies
Individual components are shown separately. Different sizes and stored template versions are not additional packaging shapes.
corrugated.rscExplore by packaging shape or application
Mailer box
Shipping box with tuck lid and dust flaps made from E flute or microflute. Inside printing, double walls and size series are part of the same construction.
corrugated.mailerView template
Folding tray with interlocking corners
An open corrugated tray with double end walls and interlocking corners. The blank is erected without adhesive; this page shows the custom V2 construction with B flute.
corrugated.trayView template
Folding carton with crash-lock bottom
The pre-glued crash-lock bottom closes as the body is erected. At the top, dust flaps and a tuck flap close the folding carton; gluing the bottom is part of the production workflow.
carton.crashlockView template
Folding carton with snap-lock bottom
The snap-lock bottom closes with four interlocking flaps. Two side flaps sit inside; a nose on the back tucks under the front flap's tongue. Version 1 combines this bottom with a tuck lid. The calculation example uses folding carton board 400 g/m² and shows the flat dieline with creases and bottom cuts.
carton.snaplockView template
Telescopic box – base
Base and lid form a two-piece corrugated construction with glued corner flaps. Both components have their own dieline; the lid is derived from the base's outside dimension and clearance on each side.
corrugated.telescope.baseView template
Telescopic box – lid
Corrugated lift-off lid with the same construction as the base; its dimensions follow the outside dimensions of the base plus clearance per side.
corrugated.telescope.lidView template
Half slotted container
Four walls with a glue flap and bottom flaps, open top: the half slotted container can be used as a shelf box or base. The custom parametric construction calculates only this open box body.
corrugated.halfslottedView template
Full overlap slotted container
The outer flaps each cover the entire opening at the top and bottom and lie on top of each other. This custom corrugated construction calculates full coverage rather than just a narrow overlap strip.
corrugated.rsc.fulloverlapView template
Self-seal shipping box
Corrugated shipping box with fully overlapping lid flaps, self-seal closure and tear strip. The bottom is closed with adhesive tape as on a slotted box; the upper closure has an adhesive strip and opening aid.
corrugated.shipper.selfsealView template
Mailer with locking tabs
Corrugated mailer with double side walls and an external tuck closure. The lid locking tabs engage through oblong holes in the front wall; the construction is erected without gluing.
corrugated.mailer.lockView template
Book wrap
Cross-shaped wrap-around packaging for books and flat goods. Additional crease lines allow folding for thinner contents; end walls and lid end flaps close the sides, an adhesive strip closes the front.
corrugated.wrapView template
Divider insert
Divider insert made from longitudinal and transverse strips with interlocking slots extending halfway down their height. All strips lie on a shared sheet and remain joined by holding nicks until separated.
corrugated.dividerView template
Insert pad
Flat insert pad as a base, intermediate layer or top insert in a box. Flat dimensions follow the box's inside space; side clearance makes the pad smaller. An optional grid forms identical rounded cutouts.
corrugated.insert.padView template
Slotted container with overlapping outer flaps
An adjustable strip connects the outer flaps at the top and bottom. The template calculates flap lengths, material layers and blank from the box dimensions and desired overlap.
corrugated.rsc.overlap.outerView template
Slotted container with meeting inner flaps
The inner flaps meet in the middle and close the opening. Outer flaps with an adjustable gap lie over them; the custom construction calculates both flap layers together.
corrugated.rsc.innerfullView template
Slotted container with snap-lock bottom
A snap-lock bottom closes this corrugated box without tape at the bottom. The top can be chosen separately: meeting flaps, fully overlapping flaps or open.
corrugated.rsc.mixedView template
Carry box with hand hole
Corrugated carry-handle box with snap-lock bottom. Two fully overlapping lid flaps have aligned handle cut-outs and are glued across their surfaces; an additional handle is not part of the construction.
corrugated.handleView template
Mailer with closure flap
Mailer with double side walls and an external closure flap. A self-adhesive strip connects the flap to the front wall; a tear strip opens it. The bottom tabs still hold the wall structure.
corrugated.mailer.flapView template
Corrugated sheet with creases
Rectangular corrugated sheet with zero to three evenly spaced creases. Without a crease, it serves as a flat layer pad; folded, it forms an angle, U-profile or wrap around a product.
corrugated.sheetView template
Slide sleeve
Corrugated sliding sleeve with glue flap and open ends. Thumb cut-outs at both ends of the top make sliding out an inner component easier. The template calculates only the sleeve.
corrugated.slideView template
Slotted container with crash-lock bottom
The corrugated box is pre-glued at the factory and supplied flat. The crash-lock bottom closes during erection; the top can have meeting flaps, fully overlapping flaps or an open edge.
corrugated.autobottomView template
Seal-end carton
Folding carton with a side seam and glued closures at the top and bottom (Seal End) instead of tuck flaps: outer flap on the front, inner flap on the back, dust flaps on the sides. For pharmaceutical and food products; opened by tearing.
carton.sealendView template
Archive box – base
Base of the archive box: corrugated half slotted container, open at the top, four bottom flaps like the slotted box, a handle hole (slot) in both end walls.
corrugated.archive.baseView template
Archive box – lid
Telescope lid of the archive box: shallow tray of bottom and four walls with glued corner flaps; in the assembly sized from the outside dimensions of the base plus clearance per side.
corrugated.archive.lidView template
Archive box with lid
Archive and storage box in corrugated board with matching base and telescope lid. The base is open at the top and has hand holes in both end walls. Clearance per side and lid height determine the fit; the starting dimensions suit A4 documents.
corrugated.archiveView templateNo matching template. Change the search or application.
Your product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app