JetDielineRollover width
Width of the double wall's rollover (crease-to-crease); holds the flaps in the pocket.
Corrugated shipping boxes / JETDIELINE
Mailer with closure flap
Mailer with double side walls and an external closure flap. A self-adhesive strip connects the flap to the front wall; a tear strip opens it. The bottom tabs still hold the wall structure.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
corrugated.mailer.flap- Construction
- Corrugated shipping boxes
- Current template version
- V1
- Dieline preview version
- V1
How the shape is constructed
Corrugated mailer with double side walls and ears; the lid overlaps the outside of the front wall with a closure flap sealed by a self-adhesive strip and opened using a tear strip – shipping packaging for online retail.
How it is assembled
Erect the front and back walls and fold the ears inwards. Erect the side walls, fold the turnover and inner wall over the ears and insert the tabs into the bottom slots. After filling, fold in the lid dust flaps, close the lid, peel off the release strip and press the closure flap against the outside of the front wall. To open, grasp the tear tape and pull out the strip.
Material and grain direction
Flute direction parallel to the blank’s y-axis: double-wall creases fold neatly, lid hinge and tuck flap remain stiff (check with the test printer).
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
250 × 180 × 80 mm25 × 18 × 8 cm9.84 × 7.09 × 3.15 in / ″
Length: 250 mmWidth: 180 mmHeight: 80 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Flap gap
Gap between adjacent flaps or walls; at least about the material thickness.
Ear length (ratio)
Length of the ears or corner flaps as a proportion of half the inside width.
Lid dust flaps (ratio)
Length of the lid dust flaps as a proportion of the inside height.
Dust flap angle
Angle of the dust flaps (also the ears on a mailer); larger angles prevent collisions during folding.
Frequently asked questions
Does the front wall have locking slots?
This type has no front wall slots for the lid closure. The closure flap is glued to the outside of the wall. Bottom slots remain because they receive the double side wall tabs. Do not confuse this assembly lock with the self-adhesive lid closure.
How is flap depth limited?
closureFlapDepth starts at 30 mm and ranges up to 100 mm. The frontWall constraint also limits depth relative to the actual front wall. The flap needs clearance from the base. A value within the table range may therefore still be invalid for a low mailer.
What happens if the adhesive strip is too wide?
The adhesive strip and tear strip must sit apart on the same flap. The stripsFitClosureFlap constraint compares their dimensions with flap depth. Adjust width, spacing and flap together. Moving a strip after SVG export would bypass this check and would not represent a documented parameter state.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Book wrap
Cross-shaped wrap-around packaging for books and flat goods. Additional crease lines allow folding for thinner contents; end walls and lid end flaps close the sides, an adhesive strip closes the front.
corrugated.wrapView template
Divider insert
Divider insert made from longitudinal and transverse strips with interlocking slots extending halfway down their height. All strips lie on a shared sheet and remain joined by holding nicks until separated.
corrugated.dividerView template
Insert pad
Flat insert pad as a base, intermediate layer or top insert in a box. Flat dimensions follow the box's inside space; side clearance makes the pad smaller. An optional grid forms identical rounded cutouts.
corrugated.insert.padView template
Carry box with hand hole
Corrugated carry-handle box with snap-lock bottom. Two fully overlapping lid flaps have aligned handle cut-outs and are glued across their surfaces; an additional handle is not part of the construction.
corrugated.handleView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app