Corrugated components and inserts / JETDIELINE

Archive box with lid

Archive and storage box in corrugated board with matching base and telescope lid. The base is open at the top and has hand holes in both end walls. Clearance per side and lid height determine the fit; the starting dimensions suit A4 documents.

Office and storage Shipping

Archive box with lid — Contours of the matching parts from the same assembly example, shown at the same scale. Set their dimensions and material together in JetDieline.

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: corrugated.archive
Assembly: Corrugated components and inserts
Current template version: V1
Dieline preview version: V1

How it is assembled

Erect the base and close its bottom flaps. Fold the lid separately and glue its corner flaps. Once dry, fit the two parts together and check the hand holes and lid fit on a filled sample.

Material and grain direction

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Sleeves, folders, cards and archive boxes hold paper and other flat contents. Account for the thickness of the full stack and check openings, handle areas and lid clearance.

Dimensions of the illustrated example

320 × 235 × 260 mm

32 × 23.5 × 26 cm12.6 × 9.25 × 10.24 in / ″

Length: 320 mmWidth: 235 mmHeight: 260 mm

Inside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

The parts of this assembly

Archive box – base ↗

Glue the manufacturer's joint, erect the box, fold in the short bottom flaps, lay the long bottom flaps over them and close with tape or glue. Break out the handle holes before filling.