Paper products and custom contours / JETDIELINE

Envelope with side flaps

Envelope or pocket envelope comprising address panel, two side flaps, bottom flap as the back and closure flap. Dimensions are the finished format; the opening is at the top edge.

Office and storage Gifts

Envelope with side flaps — Dieline preview of the documented example. Set the dimensions and production material in JetDieline.

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: envelope.pocket
Construction: Paper products and custom contours
Current template version: V1
Dieline preview version: V1

How the shape is constructed

The address panel has two side flaps, a bottom flap and a closure flap at the top opening. The side flaps have angled ends. The bottom flap forms the back. Unlike the wallet, closure flap depth here is set as a length in millimetres.

How it is assembled

Fold the side flaps inwards, place the bottom flap over them and glue it to the side flaps. After filling, fold over the closure flap and seal with adhesive strips or glue.

Material and grain direction

Grain direction vertical on the blank (check)

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Dimensions of the illustrated example

162 × 229 mm

16.2 × 22.9 cm6.38 × 9.02 in / ″

Width: 162 mmHeight: 229 mm

Outside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Side flap

Width of the side flaps to which the bottom flap is glued; no more than 40 % of the width and 30 % of the height.

Bottom flap

Bottom flap depth as a proportion of height; it forms the back of the envelope.

Closure flap

Closure flap depth at the opening; no more than 60 % of the height.

Frequently asked questions

Why is the starting size 162 × 229 mm?

The pocket envelope uses C5 portrait as the starting value for the closed finished format. Width runs across and height lengthways on the address panel; the opening is at the top. The wallet starts in landscape. They are separate construction IDs and also differ in closure flap settings, rather than merely having swapped dimensions.

Does the closure flap automatically get longer with greater height?

No. envelopeClosureFlap is a length in millimetres. envelopeBottomFlap, by contrast, is a percentage of the height. These flaps therefore grow differently after a size change. Adjust the closure flap deliberately and check overlap and insertion path; simply scaling the old dieline does not represent the parameter model.

Can I widen the side flaps as much as I like?

No. In addition to their own parameter range, they are tied to envelope width and height. Oversized side flaps no longer fit under the bottom flap or leave the intended glue area clear. Check both dimensional dependencies and agree final width with the envelope manufacturer.