Envelopes and cards / JETDIELINE

Folded card

Folded card with a single fold (two panels), roll fold (three panels, with a slightly narrower inner flap) or gate fold (centre with two wings). Dimensions refer to the folded finished format.

Office and storage Gifts

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: card.fold
Construction: Envelopes and cards
Current template version: V1
Dieline preview version: V1

How the shape is constructed

The finished format describes the folded card. In the starting example, the back and front cover sit side by side with a vertical crease between them. A roll fold adds a shortened inner flap. A gate fold divides the front into two wings with a gap in the middle.

How it is assembled

Roll fold: fold in the inner flap first, then place the front cover over it. Gate fold: fold both wings towards the centre. Single fold: fold in the middle. Re-crease all folds neatly.

Material and grain direction

Grain direction vertical on the blank (check)

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Dimensions of the illustrated example

105 × 148 mm

10.5 × 14.8 cm4.13 × 5.83 in / ″

Width: 105 mmHeight: 148 mm

Outside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Fold type

Single fold (two panels), roll fold (three panels, narrower inner flap) or gate fold (two wings meeting at the front).

Inset

Amount by which the inner flap is narrower (roll fold), or width of the gap between the wings (gate fold); at least twice the material thickness.

Frequently asked questions

Is 105 × 148 mm the open or closed format?

The dimensions refer to the folded finished format. The single fold produces two panels of equal width side by side. The starting blank is therefore 210 × 148 mm. With roll and gate folds, the blank changes despite the same finished format; create artwork only after choosing the crease type.

Which crease types does the folded card support?

cardFold offers single for a single fold, roll for a roll fold and gate for a gate fold. The single fold has a front cover and back. The roll fold adds a narrower inner flap. The gate fold has a central panel and two front wings. The template calculates separate panel boundaries for each selection.

What is cardFoldInset for?

In a roll fold, the parameter shortens the inner flap. In a gate fold, it describes the gap between the wings. The required minimum inset depends on material thickness. A single fold does not need it for panel widths. Check the combination again after a material change and test closure on the sample.

Your product. Your dimensions. Your design.

With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.

Try your dimensions Download on the Mac App Store
Ask about the app

Folded card

Interactive 3D fold view

How the shape is constructed

How it is assembled