JetDielineHole diameter
Diameter of the hanging hole; the hole maintains a minimum bridge to the edge.
Labels and bands / JETDIELINE
Hangtag
Hang tag with corner radius and a round hanging hole as an internal cut.
CutFold
- Template ID
hangtag- Construction
- Labels and bands
- Current template version
- V1
- Dieline preview version
- V1
How the shape is constructed
The outer contour is a rounded rectangle. A round internal cut creates the hanging hole. In the starting example, its centre lies 8 mm below the top edge and at 50 % of the width. The hole and outer corner radii are checked together for a minimum bridge. The construction has a single panel without creases.
How it is assembled
Remove the hang tag from the sheet and thread string, ribbon, or a loop through the hole.
Material and grain direction
No fixed grain direction; check parallel to the body axis on curved bodies
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
50 × 90 mm5 × 9 cm1.97 × 3.54 in / ″
Width: 50 mmHeight: 90 mm
Outside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Hole distance from top
Distance from the top edge to the hole centre; no more than half the height.
Lateral hole position
Position of the hole centre as a proportion of the width, measured from the left (50 % = centred).
Frequently asked questions
Where is the hole distance measured from?
holeDistance is the distance of the hole centre below the top edge. The starting value is 8 mm. With a 5 mm hole diameter, the upper hole edge is 5.5 mm below the straight top edge. The lateral position is set separately as a proportion of the width.
Can I move the hole sideways?
Yes. holePosition ranges from 10–90 % of the width, measured from the left. The starting value of 50 % is centred. The geometric constraint also checks the minimum bridge to the contour. A position within the parameter range is therefore not automatically permissible near a rounded corner.
How much material must remain around the hole?
The model requires at least 2 mm between the hole edge and outer contour. At rounded corners, the distance is checked against the actual contour. This geometric starting value does not confirm tensile strength. Test the thread, loop, and load with the intended board.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Rectangular label
Rectangular label with selectable corner radius; dieline with bleed and safe zone from the production profile.
label.rectView template
Wraparound label
Wraparound label for cylindrical bottles and cans: length from circumference (or diameter) plus overlap; the front viewing area and overlap are marked as annotation lines.
label.wrapView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app