JetDielineGlue flap
Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Folding cartons / JETDIELINE
Folding carton with snap-lock bottom
The snap-lock bottom closes with four interlocking flaps. Two side flaps sit inside; a nose on the back tucks under the front flap's tongue. Version 1 combines this bottom with a tuck lid. The calculation example uses folding carton board 400 g/m² and shows the flat dieline with creases and bottom cuts.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model with indicative material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
carton.snaplock- Construction
- Folding cartons
- Current template version
- V1
- Dieline preview version
- V1
How the shape is constructed
The body is glued at the side glue flap. Closing the 1-2-3 bottom starts with the two side flaps, followed by the slotted flap on the front and the nose flap on the back. At the cuts, the flaps change layers. The bottom locks without its own adhesive bond; the lid closes with dust flaps and a tuck flap.
How it is assembled
Glue the glue flap and lay the carton flat. For filling, erect it, fold in side flaps 1 and 2, lay flap 3 with its tongue over them and tuck the nose of flap 4 under the tongue. After filling, fold in the dust flaps and insert the tuck flap.
Material and grain direction
Grain direction parallel to the height: wall creases along the grain, bottom and lid creases across it; the flaps remain stiff and the nose does not bend out from under the tongue (check with the test printer).
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
80 × 60 × 120 mm8 × 6 × 12 cm3.15 × 2.36 × 4.72 in / ″
Length: 80 mmWidth: 60 mmHeight: 120 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Glue flap angle
Angled ends of the glue flap; make folding and erection easier.
Tuck depth
How far the tuck flap extends into the box; at most about half the width (the height for a mailer).
Tuck flap radius
Corner radius of the tuck flap; limited by half the flap width or tuck depth.
Tuck flap shoulder
Side inset of the tuck flap relative to the lid, to allow easy insertion.
Frequently asked questions
In what order do I close the bottom?
First fold the two side flaps inwards, then the front flap with the cuts and finally the back's nose flap. The nose engages under the tongue; the layers change at the cuts. Check this sequence on a sample before filling, especially with thicker board and small inside dimensions.
Is the snap-lock bottom glued?
The bottom flaps interlock without their own adhesive bond. The body's side glue flap is still glued to form a tube. This distinguishes this bottom from the pre-glued crash-lock bottom. You must lock it when erecting; it does not form simply by opening the flat carton.
How much overlap is permitted?
flapOverlap starts at 10 mm and has a range from 2 to 40 mm. The model also limits overlap to 40 % of the bottom width. The table's maximum value therefore does not fit every inside dimension. Agree overlap and nose length together and check the bottom with the target board.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Reverse tuck-end carton
The top tuck flap sits on the front, the bottom one on the back. The reverse tuck-end carton calculates its walls, dust flaps and closures from the inside dimension. The dieline shown comes from version 3 with the hanging hole disabled; artwork, production dieline and report can be exported together in the technical core.
carton.tuckend.reverseView template
Sleeve
The sleeve surrounds a product with four walls and remains open at both ends. Length and width describe the cross-section; height describes the sleeve length. The dieline shows version 1 with finger notches on the front. Material thickness, glue flap and notch position remain part of the calculation rather than simple scaling.
carton.sleeveView template
Pillow box
The pillow box bows two wall panels between lens-shaped end flaps. Curved creases form the closure instead of straight lid creases. In version 1, the inputs mean width × thickness × length of the packaging. The dieline shown accounts for these proportions and the starting material; it does not define a rectangular box interior.
carton.pillowView template
Hinged lid carton
The hinged lid sits on the back wall and places its front wall over the outside of the front. A lid tab passes through a slot in the front; a tuck bottom closes the base. This page shows version 2 with the hanging hole disabled. The technical core calculates lid overhang, flaps and creases from the chosen dimensions and material profile.
carton.hinged.lidView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app