Rigid boxes / JETDIELINE

Magnetic closure box – tray wrap

Wrapping paper for the tray: cross shape with corner flaps and turn-ins; covers the magnet in the front wall.

Magnetic closure box – tray wrap — Dieline preview of the documented example. Set the dimensions and production material in JetDieline.

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: rigid.magnetic.tray.wrap
Component: Rigid boxes
Current template version: V1
Dieline preview version: V1

This template is a component of a packaging assembly. Match its dimensions to the other parts; lids, bases, wraps and linings serve different purposes.

How it is assembled

Apply adhesive across the entire wrap and position the shell centrally. Fold up front and rear walls, fold corner flaps around the edges, glue end walls over them and fold turn-ins inwards.

Material and grain direction

Grain direction of greyboard and wrapping paper parallel to the blank's x-axis: the long grooves fold cleanly, and board and paper do not warp against each other during lamination (check with the box manufacturer).

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Compare opening and presentation: pillow shapes, bands, drawers or lift-off lids. Plan the fit of contents and inserts and allow clearance between moving parts.

Dimensions of the illustrated example

200 × 150 × 50 mm

20 × 15 × 5 cm7.87 × 5.91 × 1.97 in / ″

Length: 200 mmWidth: 150 mmHeight: 50 mm

Inside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Greyboard thickness

Thickness of the greyboard around which the wrap is folded; the assembly sets it from the greyboard material.

Turn-in

Depth to which the wrap is turned inwards over the top edge, measured from the inside edge.

Corner tab

Width of the tabs that wrap around the vertical edges and are covered by the neighbouring wall's wrap.

Frequently asked questions

What is the separate inside lining for?

The inside lining covers the case wrap turn-ins and the magnet in the flap. It is smaller than the case all round; liningMargin starts at 3 mm. Its joint lines follow the case. Check glue application and movement on the sample so the lining neither stretches nor blocks the joints during closure.

Which magnet size does the example show?

The individual component starting value is a disc magnet with a 10 mm diameter. The model creates a 10.5 mm recess in the tray front wall and flap. Diameter and position are construction values. A matching opening determines neither magnet thickness in the material nor holding force or polarity. Confirm the magnet, flush installation and adhesive with the box manufacturer carrying out the work.

Why is the tray magnet height initially 25 mm?

25 mm is the parameter default for the separately calculated tray template and belongs to the existing preview. The assembly overrides it to match the flap; the starting case uses 22.8 mm. This distinction is crucial for assembly. Do not transfer independently calculated magnet positions into a finished assembly without checking their alignment.

Your product. Your dimensions. Your design.

With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.

Try your dimensions Download on the Mac App Store
Ask about the app

Magnetic closure box – tray wrap

Interactive 3D fold view

How it is assembled