Labels and bands / JETDIELINE

Wraparound label for tapered cups

Wraparound label for tapered cups and cans as a cone blank (annular sector) with a glue strip of constant width.

Template ID: label.tapered.wrap
Construction: Labels and bands
Current template version: V1
Dieline preview version: V1

How the shape is constructed

The blank is an annular sector with a glue strip of constant width. In the starting cup, the larger diameter is at the top; the construction therefore mirrors the arc arrangement relative to the neck label. A single panel carries the cut contour. Vertical body height is converted to the slant height of the blank.

How it is assembled

Position the label’s starting edge along a generatrix, align the large arc with the wide opening, wrap around and glue the end over the start using the glue strip.

Material and grain direction

No fixed grain direction; check parallel to the body axis on curved bodies

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Dimensions of the illustrated example

90 mm

9 cm3.54 in / ″

Height: 90 mm

Outside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

Frequently asked questions

Which arc goes at the wide cup opening?

The larger diameter belongs to the annular sector’s outer arc. In the starting cup, this is the upper opening. The template accounts for taper direction and mirrors the blank accordingly. Align the large arc with the wide end when applying.

Is height the length of the sloping cup wall?

No. The expected input is the vertical height between the measured diameters. The construction calculates slant height from height and radius difference. Entering sloping length as height produces a different blank. Check dimensions in the intended label area.

Can I widen the glue strip arbitrarily?

The dimension range is 0–30 mm. Inner radius and total angle also limit permitted overlap. A value within the range is therefore not always geometrically possible. The starting example uses 10 mm; confirm gluing and fit with a sample in the target material.