JetDielineButt joint gap
Walls placed between the long walls are shorter by this value at each joint to prevent jamming during erection.
Rigid boxes / JETDIELINE
Drawer box – sleeve (greyboard)
Greyboard sleeve: strip with three V-grooves, open at both ends, with a butt joint at the lower front edge.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
rigid.drawer.sleeve- Component
- Rigid boxes
- Current template version
- V1
- Dieline preview version
- V1
This template is a component of a packaging assembly. Match its dimensions to the other parts; lids, bases, wraps and linings serve different purposes.
How it is assembled
Fold front, back and underside along the grooves until the underside meets the front. Close the butt joint with adhesive tape, then wrap.
Material and grain direction
Grain direction of greyboard and wrapping paper parallel to the blank's x-axis: the long grooves fold cleanly, and board and paper do not warp against each other during lamination (check with the box manufacturer).
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Compare opening and presentation: pillow shapes, bands, drawers or lift-off lids. Plan the fit of contents and inserts and allow clearance between moving parts.
Dimensions of the illustrated example
153 × 104.6 × 43.1 mm15.3 × 10.46 × 4.31 cm6.02 × 4.12 × 1.7 in / ″
Length: 153 mmWidth: 104.6 mmHeight: 43.1 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Frequently asked questions
Which dimensions does the sleeve table describe?
The sleeve uses starting values of 153 mm length, 104.6 mm inside width and 43.1 mm inside height. These dimensions are derived from the greyboard tray, starting clearance and paper. They are not additional product dimensions. When changing the tray interior, sleeve and both wraps must be recalculated together.
Why is the pull ribbon in two blanks?
The oblong hole lies in the greyboard tray’s right end wall. With the pull ribbon enabled, the tray wrap receives a matching oblong hole over this opening. Both parts must use the same setting and ribbon width. The starting preview shows the ribbon disabled; actual ribbon assembly requires a recalculated variant and an assembly test sample.
How wide can the pull ribbon be?
The ribbonWidth parameter allows 6 to 25 mm and starts at 10 mm. The oblong hole and its bridges must also fit within the end wall. The contour is 2 mm longer than the ribbon width and 3 mm wide; at least a 5 mm bridge remains on each side. The geometric limit may be tighter than the parameter range.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
Spot problems before you pass on files
Export and handover
Files your printer can trace
Related templates
Drawer box – sleeve wrap
Wrapping paper for the sleeve: strip with overlap at the butt joint and turn-ins at both open ends.
rigid.drawer.sleeve.wrapView template
Drawer box – tray (greyboard)
Greyboard tray: tray with V-grooves and butt-jointed corners, optionally with a slot for a ribbon handle in the right end wall.
rigid.drawer.trayView template
Drawer box – tray wrap
Wrapping paper for the tray: cross with corner flaps and turn-ins, optionally with a slot above the tray's slot.
rigid.drawer.tray.wrapView template
Lid and base box – base (greyboard)
Greyboard shell for the base of a rigid box: base with four walls, V-grooves and butt-jointed corners.
rigid.lidbase.baseView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app