JetDielineMailer box
Shipping box with a tuck lid and dust flaps made from E-flute or microflute board. Inside printing, double walls and size series are part of the same structure.
corrugated.mailerView templateJETDIELINE / Templates
Gifts
Compare opening and presentation: pillow shapes, bands, drawers or lift-off lids. Plan the fit of contents and inserts and allow clearance between moving parts.
53Constructions, components and assemblies
Individual components are shown separately. Different sizes and stored template versions are not additional packaging shapes.
corrugated.mailerExplore by packaging shape or application
Sleeve
The sleeve surrounds a product with four walls and remains open at both ends. Length and width describe the cross-section; height describes the sleeve length. The dieline shows version 1 with finger notches on the front. Material thickness, glue flap and notch position remain part of the calculation rather than simple scaling.
carton.sleeveView template
Telescope box – base
Base and lid form a two-piece corrugated construction with glued corner flaps. Both components have their own dieline; the lid is derived from the base's outside dimension and clearance on each side.
corrugated.telescope.baseView template
Telescope box – lid
Corrugated lift-off lid with the same construction as the base; its dimensions follow the outside dimensions of the base plus clearance per side.
corrugated.telescope.lidView template
Paper band
Paper wrap band around a round body or a stack: length from circumference plus ease allowance and overlap; the overlap at the beginning is the glue area.
band.wrapView template
Belly band for boxes
Paper belly band around the four walls of a box, with creases at the edges and a glue flap; crease-to-crease dimensions from the box's outside dimensions plus material thickness.
band.bellyView template
Hang tag
Hang tag with corner radius and a round hanging hole as an internal cut.
hangtagView template
Lid and base box – base (greyboard)
Greyboard shell for the base of a rigid box: base with four walls, V-grooves and butt-jointed corners.
rigid.lidbase.baseView template
Lid and base box – lid (greyboard)
Greyboard shell for the lid, constructed in the same way as the base; dimensions from the base outside dimensions plus clearance and paper.
rigid.lidbase.lidView template
Lid and base box – base wrap
Wrapping paper for the base: cross-shaped blank with corner tabs on the front and back walls and turn-ins over the top edge to the inside.
rigid.lidbase.base.wrapView template
Lid and base box – lid wrap
Wrapping paper for the lid, constructed in the same way as the base wrap.
rigid.lidbase.lid.wrapView template
Drawer box – tray (greyboard)
Greyboard tray: tray with V-grooves and butt-jointed corners, optionally with a slot for a ribbon handle in the right end wall.
rigid.drawer.trayView template
Drawer box – sleeve (greyboard)
Greyboard sleeve: strip with three V-grooves, open at both ends, with a butt joint at the lower front edge.
rigid.drawer.sleeveView template
Drawer box – tray wrap
Wrapping paper for the tray: cross with corner flaps and turn-ins, optionally with a slot above the tray's slot.
rigid.drawer.tray.wrapView template
Drawer box – sleeve wrap
Wrapping paper for the sleeve: strip with overlap at the butt joint and turn-ins at both open ends.
rigid.drawer.sleeve.wrapView template
Magnetic closure box – tray (greyboard)
Greyboard tray with V-grooves and butt-jointed corners, with a round magnet recess centred in the front wall.
rigid.magnetic.trayView template
Magnetic closure box – tray wrap
Wrapping paper for the tray: cross shape with corner flaps and turn-ins; covers the magnet in the front wall.
rigid.magnetic.tray.wrapView template
Magnetic closure box – case (greyboard)
Greyboard hinged-lid case: base, spine with spine allowance, lid and front flap in one strip with V-grooves, round magnet recess in the flap.
rigid.magnetic.coverView template
Magnetic closure box – case wrap
Wrapping paper for the case: panel with turn-ins all round, corner cuts at 45° and creases at the joint positions.
rigid.magnetic.cover.wrapView template
Magnetic closure box – inside lining
Lining paper for the inside of the case, smaller all round by the margin; covers the turn-ins and flap magnet.
rigid.magnetic.cover.liningView template
Neck box – base (greyboard)
Greyboard shell for the neck box base: base panel with four walls, V-grooves and butt-jointed corners.
rigid.neck.baseView template
Neck box – base wrap
Wrapping paper for the neck box base: cross shape with corner flaps and turn-ins over the top edge inwards.
rigid.neck.base.wrapView template
Neck box – neck (greyboard)
Greyboard neck: surrounding strip with three V-grooves, joint at the rear right corner; sits in the base and protrudes above it by the neck height.
rigid.neck.neckView template
Neck box – neck wrap
Wrapping paper for the neck: strip with overlap at the joint and turn-ins at the top edge covering the inside down to the base.
rigid.neck.neck.wrapView template
Neck box – lid (greyboard)
Greyboard shell for the neck box lid; dimensions from the base inside dimension plus clearance, height from neck height plus clearance.
rigid.neck.lidView template
Neck box – lid wrap
Wrapping paper for the neck box lid in the same construction type as the base wrap.
rigid.neck.lid.wrapView template
Wrap for can or tube
Calculate the wrap from diameter or circumference, height and overlap. For a cardboard tube, slit turn-ins are added; for a can, you can disable both. The drawing shows the blank with starting values, not a finished can or confirmed fit.
tube.wrapView template
Lid or base disc with tabs
The lid or base disc has glue flaps around a circular crease line. The starting dimension is the cylindrical wall's inside diameter, together with its height. The parametric dieline shows the disc as an individual component; check a matching wall and assembly separately.
tube.discView template
Pillow box
The pillow box bows two wall panels between lens-shaped end flaps. Curved creases form the closure instead of straight lid creases. In version 1, the inputs mean width × thickness × length of the packaging. The dieline shown accounts for these proportions and the starting material; it does not define a rectangular box interior.
carton.pillowView template
Hinged lid carton
The hinged lid sits on the back wall and places its front wall over the outside of the front. A lid tab passes through a slot in the front; a tuck bottom closes the base. This page shows version 2 with the hanging hole disabled. The technical core calculates lid overhang, flaps and creases from the chosen dimensions and material profile.
carton.hinged.lidView template
Hexagonal carton
Six walls form a hexagonal footprint with tuck lid and bottom. The inputs mean across corners × across flats × height, rather than a rectangle's length and width. Version 1 calculates the angled walls, mitres and creases from these dimensions. The example shows the straight lid style; the bottom can alternatively sit on the back.
carton.hexagonView template
Gable box with handle
The gable box combines a tuck bottom with a pitched roof and glued handle flaps. The page explicitly shows version 1 with a handle hole, roof panels and gussets. The entered height describes the body; gable and handle are added through their own parameters. The calculated dieline is a basis for a folding sample and does not demonstrate a load capacity.
carton.gableView template
Mailer with locking tabs
Corrugated mailer with double side walls and an external tuck closure. The lid locking tabs engage through oblong holes in the front wall; the construction is erected without gluing.
corrugated.mailer.lockView template
Card sleeve
Flat sleeve for gift, loyalty or greeting cards: front with a thumb cut-out at the opening, back at the bottom fold, side seams formed by glue flaps, optional closure flap. Dimensions are the card's insertion dimensions; clearance and flaps make the sleeve larger.
card.sleeveView template
Envelope with side flaps
Envelope or pocket envelope comprising address panel, two side flaps, bottom flap as the back and closure flap. Dimensions are the finished format; the opening is at the top edge.
envelope.pocketView template
Carrier bag with gussets
Paper carrier bag comprising front, back and two side gussets with longitudinal seam, block bottom, top turn-in as handle reinforcement and die-cut handle holes; dimensions bag width × gusset depth × height. Bottom insert and handles are separate parts.
bag.carrierView template
Custom shape with creases
Blank from your own closed contour (point list, e.g. from an SVG file) with a uniform corner radius and up to four crease lines between contour points; the panels are derived from the crease lines.
custom.polygonView template
Wallet envelope with side flaps
Envelope opening on the long side: address panel, two side flaps, bottom flap forming the back, and a straight or pointed closure flap. Dimensions refer to the finished format; starting sizes DL, C6, C5, C4 and US No. 10.
envelope.walletView template
Folded card
Folded card with a single fold (two panels), roll fold (three panels, with a slightly narrower inner flap) or gate fold (centre with two wings). Dimensions refer to the folded finished format.
card.foldView template
Gift card holder
Folded card or single card with four corner slots (corner pockets) or two side slots for a gift card in credit card format 85.6 × 54 mm; optional header with hanging hole.
card.giftholderView template
Carry box with hand hole
Corrugated carry-handle box with snap-lock bottom. Two fully overlapping lid flaps have aligned handle cut-outs and are glued across their surfaces; an additional handle is not part of the construction.
corrugated.handleView template
Mailer with closure flap
Mailer with double side walls and an external closure flap. A self-adhesive strip connects the flap to the front wall; a tear strip opens it. The bottom tabs still hold the wall structure.
corrugated.mailer.flapView template
Slide sleeve
Corrugated sliding sleeve with glue flap and open ends. Thumb cut-outs at both ends of the top make sliding out an inner component easier. The template calculates only the sleeve.
corrugated.slideView template
Insert with cut-out
Board insert for a box: platform with a freely positioned product cutout (rectangle, circle or oval) on folded-down feet at two or four edges, optionally with inward-folded foot tabs. Dimensions: insert outside dimensions (box inside dimensions) × platform height.
carton.insert.cutoutView template
Telescope box (folding carton) – base
Lower part of the telescopic box made from folding boxboard: base with four walls and glued corner flaps, same design as the corrugated telescopic box, for smaller gift and chocolate boxes.
carton.telescope.baseView template
Telescope box (folding carton) – lid
Telescopic lid made from folding boxboard in the same design as the base; dimensions from the base's outside dimension plus clearance on each side.
carton.telescope.lidView template
Polygon box (n-gon)
Folding carton with 5 to 12 walls as a generalization of the hexagon box: glue flap, tuck lid at the front with the tuck flap opposite, straight or reverse bottom, mitred dust flaps. Length × width is the rectangle the n-gon fills.
carton.polygonView template
Trapezoid box
Folding carton with an isosceles trapezoid plan: wide front, narrower back, slanted sides; tuck lid at the front with the tuck flap at the back, straight or reverse bottom. Dimensions: front × depth × height.
carton.trapezoidView template
Pyramid
Pyramid with 3 to 8 triangular faces as a fan around the apex, glue flap, bottom with tuck flap and dust flaps on the other faces. Dimensions: base length × width, apex height above the bottom.
carton.pyramidView template
Sphere box
Sphere or ball box as a polyhedron of meridian strips: equator walls, zone faces with glue flaps above and below, a lid at the top and a bottom with tuck flap, dust flaps on the other strips. Dimensions: diameter at the equator (length = width) and height.
carton.sphereView template
Telescope box (folding carton)
Base and telescope lid in folding boxboard form one assembly. Both parts have glued corner flaps; the lid follows the outside dimensions of the base plus clearance per side. For gift and chocolate boxes.
carton.telescopeView template
Bottle carrier with divider
Bottle carrier for 4 or 6 bottles with a matching slotted divider. Two hole decks and the carrying handle hold the bottles in the carrier; additional strips also separate them below. The divider is derived from the internal space and selected bottle count.
carrier.bottle.dividerView templateNo matching template. Change your search or application.
Your product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app