JetDielineGreyboard thickness
Thickness of the greyboard around which the wrap is folded; the assembly sets it from the greyboard material.
Rigid boxes / JETDIELINE
Lid and base box – base wrap
Wrapping paper for the base: a cross with corner flaps on the front and back walls and turn-ins over the top edge to the inside.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
rigid.lidbase.base.wrap- Component
- Rigid boxes
- Current template version
- V1
- Dieline preview version
- V1
This template is a component of a packaging assembly. Match its dimensions to the other parts; lids, bases, wraps and linings serve different purposes.
How it is assembled
Apply adhesive over the full wrap surface and center the shell on the base panel. Fold up the front and back walls, fold the corner flaps around the edges onto the ends, and glue the end walls over them. Finally, fold all turn-ins over the top edge to the inside.
Material and grain direction
Grain direction of greyboard and wrapping paper parallel to the x-axis of the blank: the long grooves fold cleanly, and board and paper do not warp against each other during wrapping (check with the rigid box manufacturer).
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Compare opening and presentation: pillow shapes, bands, drawers or lift-off lids. Plan the fit of contents and inserts and allow clearance between moving parts.
Dimensions of the illustrated example
200 × 150 × 60 mm20 × 15 × 6 cm7.87 × 5.91 × 2.36 in / ″
Length: 200 mmWidth: 150 mmHeight: 60 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Turn-in
Depth to which the wrap folds inward over the top edge, measured from the inside edge.
Corner flap
Width of the flaps that wrap around the vertical edges and are covered by the adjacent wall wrap.
Frequently asked questions
Why is the lid larger than the base?
The lid must fit over the already wrapped base. The model adds twice the clearance and four times the paper thickness to the outside dimensions of the base. The inside dimensions of the lid greyboard therefore differ from the product's inside space. If you change the paper or greyboard, recalculate the assembly and confirm the fit on the sample.
Is the lid height the same as the base height?
No. The base starts with an inside height of 60 mm, the lid with 30 mm. ASM-002 warns when lid walls are higher than the base. The lid may then touch the supporting surface. Decide how far the lid should overlap the base with the manufacturer using the wrapped sample.
Why do the wraps have their own dimensions and parameters?
The base wrap and lid wrap enclose different shells. Both use the dimensions of the corresponding greyboard and its thickness as the boardCaliper parameter. Turn-ins and corner flaps change the paper outline. Do not transfer changes by simply scaling: the shell, its wall height, and the wrapping paper thickness limit the possible turn-in.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
See problems before you pass on files
Export and handover
Files your printer can follow
Related templates
Lid and base box – base (grayboard)
Greyboard shell for the base of a rigid box: base with four walls, V-grooves, and butt-jointed corners.
rigid.lidbase.baseView template
Lid and base box – lid (grayboard)
Greyboard shell for the lid, constructed in the same way as the base; dimensions derived from the outside dimensions of the base plus clearance and paper.
rigid.lidbase.lidView template
Lid and base box – lid wrap
Wrapping paper for the lid, constructed in the same way as the base wrap.
rigid.lidbase.lid.wrapView template
Drawer box – tray (grayboard)
Greyboard tray: shell with V-grooves and butt-jointed corners, optionally with a slot for a pull ribbon in the right end wall.
rigid.drawer.trayView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app