JetDielineLid and base box – base (grayboard)
Greyboard shell for the base of a rigid box: base with four walls, V-grooves, and butt-jointed corners.
rigid.lidbase.baseView templateJETDIELINE / Templates
Rigid boxes
Lift-off lids, drawers, magnetic closures and shoulder boxes consist of several parts. Board cores, wraps and linings are separate dielines. Compare opening mechanisms and match lid, base and clearance.
19Constructions, components and assemblies
Individual components are shown separately. Different sizes and stored template versions are not additional packaging shapes.
rigid.lidbase.baseExplore by packaging shape or application
Lid and base box – lid (grayboard)
Greyboard shell for the lid, constructed in the same way as the base; dimensions derived from the outside dimensions of the base plus clearance and paper.
rigid.lidbase.lidView template
Lid and base box – base wrap
Wrapping paper for the base: a cross with corner flaps on the front and back walls and turn-ins over the top edge to the inside.
rigid.lidbase.base.wrapView template
Lid and base box – lid wrap
Wrapping paper for the lid, constructed in the same way as the base wrap.
rigid.lidbase.lid.wrapView template
Drawer box – tray (grayboard)
Greyboard tray: shell with V-grooves and butt-jointed corners, optionally with a slot for a pull ribbon in the right end wall.
rigid.drawer.trayView template
Drawer box – sleeve (grayboard)
Greyboard sleeve: strip with three V-grooves, open at both ends, with a joint at the lower front edge.
rigid.drawer.sleeveView template
Drawer box – tray wrap
Wrapping paper for the tray: cross-shaped blank with corner flaps and turn-ins, optionally with a slot over the tray's slot.
rigid.drawer.tray.wrapView template
Drawer box – sleeve wrap
Wrapping paper for the sleeve: strip with overlap at the joint and turn-ins at both open ends.
rigid.drawer.sleeve.wrapView template
Magnetic closure box – tray (grayboard)
Grayboard tray with V-grooves and butt-jointed corners, with a round magnet recess centered in the front wall.
rigid.magnetic.trayView template
Magnetic closure box – tray wrap
Wrapping paper for the tray: cross with corner flaps and turn-ins; covers the magnet in the front wall.
rigid.magnetic.tray.wrapView template
Magnetic closure box – case (grayboard)
Grayboard hinged-lid case: bottom, spine with spine allowance, lid, and front flap in one strip with V-grooves, round magnet recess in the flap.
rigid.magnetic.coverView template
Magnetic closure box – case wrap
Wrapping paper for the case: surface with turn-ins all around, corner cuts at 45°, and creases at hinge positions.
rigid.magnetic.cover.wrapView template
Magnetic closure box – inside lining
Lining paper for the inside of the case, smaller by the margin all around; covers the turn-ins and the flap's magnet.
rigid.magnetic.cover.liningView template
Neck box – base (grayboard)
Grayboard shell for the neck box base: bottom with four walls, V-grooves, butt-jointed corners.
rigid.neck.baseView template
Neck box – base wrap
Wrap paper for the neck box base: cross shape with corner flaps and turn-ins over the top edge and inward.
rigid.neck.base.wrapView template
Neck box – neck (grayboard)
Grayboard neck: continuous strip with three V-grooves, joint at the back right corner; sits in the base and protrudes above it by the neck height.
rigid.neck.neckView template
Neck box – neck wrap
Wrap paper for the neck: strip with overlap at the joint and turn-ins at the top edge covering the inside down to the bottom.
rigid.neck.neck.wrapView template
Neck box – lid (grayboard)
Grayboard shell for the neck box lid; dimensions derived from the base's inside dimensions plus clearance, height from neck height plus clearance.
rigid.neck.lidView template
Neck box – lid wrap
Wrap paper for the neck box lid, using the same construction as the base wrap.
rigid.neck.lid.wrapView templateNo matching template. Change your search or application.
Your product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app