JETDIELINE / Templates

Cosmetics

Match the carton to a bottle, jar or product set. Compare classic folding cartons, inserts and gift packaging with several parts. Check clearance and the position of logos and required text.

45Constructions, components and assemblies

Individual components are shown separately. Different sizes and stored template versions are not additional packaging shapes.

carton.tuckend.straight

45 visible entriesView the full catalog ↗

Straight tuck-end carton

Blank, creases, and flaps are calculated from inside dimensions. The result is an artwork PDF, production dieline, and production sheet for the print shop.

carton.tuckend.straightView template

The top tuck flap is attached to the front, the bottom one to the back. The reverse tuck end carton calculates its walls, dust flaps, and closures from the inside dimension. The dieline shown comes from Version 3 with the hanging hole disabled; artwork, production dieline, and report can be exported together in the technical core.

carton.tuckend.reverseView template

Mailer box

Shipping box with tuck lid and dust flaps made from E flute or microflute. Inside printing, double walls, and size series are part of the same construction.

corrugated.mailerView template

Sleeve

The sleeve surrounds a product with four walls and remains open at both ends. Length and width describe the cross section; height denotes sleeve length. The dieline shows version 1 with finger notches on the front. Material thickness, glue flap, and notch position remain part of the calculation rather than simple scaling.

carton.sleeveView template

Folding carton with crash-lock bottom

The pre-glued crash-lock bottom closes as the body is erected. Dust flaps and a tuck flap close the top of the folding carton; bottom gluing is part of the production workflow.

carton.crashlockView template

Rectangular label

Rectangular label with selectable corner radius; dieline with bleed and safety zone from the production profile.

label.rectView template

Round label

Circular label; the diameter is both width and height.

label.roundView template

Oval label

Oval label as an ellipse with width and height as axes.

label.ovalView template

Wraparound label

Wrap label for cylindrical bottles and cans: length from circumference (or diameter) plus overlap; the front viewing area and overlap are marked as annotation lines.

label.wrapView template

Belly band for boxes

Paper belly band around the four walls of a box, with creases at the edges and a glue flap; crease-to-crease dimensions from the box's outside dimensions plus material thickness.

band.bellyView template

Lid and base box – base (grayboard)

Greyboard shell for the base of a rigid box: base with four walls, V-grooves, and butt-jointed corners.

rigid.lidbase.baseView template

Lid and base box – lid (grayboard)

Greyboard shell for the lid, constructed in the same way as the base; dimensions derived from the outside dimensions of the base plus clearance and paper.

rigid.lidbase.lidView template

Lid and base box – base wrap

Wrapping paper for the base: a cross with corner flaps on the front and back walls and turn-ins over the top edge to the inside.

rigid.lidbase.base.wrapView template

Lid and base box – lid wrap

Wrapping paper for the lid, constructed in the same way as the base wrap.

rigid.lidbase.lid.wrapView template

Drawer box – tray (grayboard)

Greyboard tray: shell with V-grooves and butt-jointed corners, optionally with a slot for a pull ribbon in the right end wall.

rigid.drawer.trayView template

Drawer box – sleeve (grayboard)

Greyboard sleeve: strip with three V-grooves, open at both ends, with a joint at the lower front edge.

rigid.drawer.sleeveView template

Drawer box – tray wrap

Wrapping paper for the tray: cross-shaped blank with corner flaps and turn-ins, optionally with a slot over the tray's slot.

rigid.drawer.tray.wrapView template

Drawer box – sleeve wrap

Wrapping paper for the sleeve: strip with overlap at the joint and turn-ins at both open ends.

rigid.drawer.sleeve.wrapView template

Magnetic closure box – tray (grayboard)

Grayboard tray with V-grooves and butt-jointed corners, with a round magnet recess centered in the front wall.

rigid.magnetic.trayView template

Magnetic closure box – tray wrap

Wrapping paper for the tray: cross with corner flaps and turn-ins; covers the magnet in the front wall.

rigid.magnetic.tray.wrapView template

Magnetic closure box – case (grayboard)

Grayboard hinged-lid case: bottom, spine with spine allowance, lid, and front flap in one strip with V-grooves, round magnet recess in the flap.

rigid.magnetic.coverView template

Magnetic closure box – case wrap

Wrapping paper for the case: surface with turn-ins all around, corner cuts at 45°, and creases at hinge positions.

rigid.magnetic.cover.wrapView template

Magnetic closure box – inside lining

Lining paper for the inside of the case, smaller by the margin all around; covers the turn-ins and the flap's magnet.

rigid.magnetic.cover.liningView template

Neck box – base (grayboard)

Grayboard shell for the neck box base: bottom with four walls, V-grooves, butt-jointed corners.

rigid.neck.baseView template

Neck box – base wrap

Wrap paper for the neck box base: cross shape with corner flaps and turn-ins over the top edge and inward.

rigid.neck.base.wrapView template

Neck box – neck (grayboard)

Grayboard neck: continuous strip with three V-grooves, joint at the back right corner; sits in the base and protrudes above it by the neck height.

rigid.neck.neckView template

Neck box – neck wrap

Wrap paper for the neck: strip with overlap at the joint and turn-ins at the top edge covering the inside down to the bottom.

rigid.neck.neck.wrapView template

Neck box – lid (grayboard)

Grayboard shell for the neck box lid; dimensions derived from the base's inside dimensions plus clearance, height from neck height plus clearance.

rigid.neck.lidView template

Neck box – lid wrap

Wrap paper for the neck box lid, using the same construction as the base wrap.

rigid.neck.lid.wrapView template

Wrap for can or tube

Calculate the wrap from diameter or circumference, height, and overlap. Slit turn-ins are added for a cardboard tube; for a can, you can disable both. The drawing shows the blank with starting values, not a finished can or confirmed fit.

tube.wrapView template

Lid or base disc with tabs

The lid or base disc has glue flaps around a circular crease line. The starting dimensions are the inside diameter of the tube wall and its height. The parametric dieline shows the disc as an individual component; check a matching tube wall and assembly separately.

tube.discView template

Counter display

Open countertop display: low front wall with a finger recess, tall back wall with an advertising area, and sloping side walls; corners are glued inside with corner glue flaps as on the tray.

carton.display.counterView template

Pillow box

The pillow box curves two wall surfaces between lens-shaped end flaps. Curved creases create the closure instead of straight lid creases. In version 1, the inputs mean the package's width × thickness × length. The shown dieline accounts for these proportions and the starting material; it does not define a rectangular box interior.

carton.pillowView template

Hinged-lid carton

The hinged lid sits on the back wall and lays its front wall over the outside of the front. A lid flap inserts through a slot in the front; a tuck bottom closes the base. The page shows version 2 with the hanging hole disabled. The technical core calculates lid overhang, flaps, and creases from the chosen dimensions and material profile.

carton.hinged.lidView template

Tuck-end carton with window

The window carton combines straight tuck closures with a front cutout. Choose a rectangle with corner radius or an oval and leave room for the film margin and bridges. The shown version 2 starts with a rectangular window and no hanging hole. The dieline provides the construction; window film is patched separately on the inside.

carton.windowView template

Hexagonal carton

Six walls form a hexagonal footprint with a tuck lid and bottom. Inputs mean across corners × across flats × height, rather than the length and width of a rectangle. Version 1 calculates the angled walls, miters, and creases from these dimensions. The example shows the straight lid style; alternatively, the bottom can be attached to the back.

carton.hexagonView template

Mailer with closure flap

Mailer with double side walls and an external closure flap. A self-adhesive strip connects the flap to the front wall; a tear strip opens it. The bottom locking tabs still hold the wall structure.

corrugated.mailer.flapView template

Flat pouch (3-side seal)

This template calculates the print mask for a flat pouch with a three-side seal. Front and back share one print sheet with a bottom fold. Side and top seams are seal zones; optional additions include a zipper, tear notch, and hanging hole. The drawing is not an approved die-cutting contour for film.

pouch.flatView template

Spout pouch

The spout pouch print mask adds a sealed-in spout to the stand-up pouch. Choose the top right corner or the center of the top edge and enter the inside diameter. The spout's boat-shaped flange is part of the seal zones; the drawing documents its position, not confirmed component fit.

pouch.spoutView template

Tissue box

Horizontal box for facial tissues and handkerchiefs: body with side seam, ends with glued closures (Seal End), dispensing opening in the top as a perforation (slot or rectangle) with a thumb notch. Dimensions: length × top width × height.

carton.tissueView template

Insert with cutout

Paperboard insert for a box: a platform with a product cut-out (rectangle, circle, or oval, freely positioned) on folded legs at two or four edges, optionally with inward-folded leg flaps. Dimensions: outside dimensions of the insert (inside dimensions of the box) × platform height.

carton.insert.cutoutView template

Your product. Your dimensions. Your design.

With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.

Try your dimensions Download on the Mac App Store
Ask about the app

Cosmetics

Explore by packaging shape or application

Your product. Your dimensions. Your design.