JetDielineGlue flap
Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Corrugated shipping boxes / JETDIELINE
Slide sleeve
Corrugated sliding sleeve with glue flap and open ends. Thumb notches at both ends of the top make it easier to push out an inner part. The template calculates the sleeve only.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
corrugated.slide- Construction
- Corrugated shipping boxes
- Current template version
- V1
- Dieline preview version
- V1
How the shape is constructed
Corrugated tube with glue flap, open at both ends, with thumb notches on the top; an inner part (e.g., a corrugated tray) slides inside. Dimensions: inside cross-section × tube length.
How it is assembled
Glue the glue flap to the underside and lay the sleeve flat. Erect for use and slide in the inner part; to open, push it out at the thumb notch.
Material and grain direction
Flute parallel to the tube: Wall creases fold along the flute, and the sleeve is stiff in the sliding direction (check with a test print shop).
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
210 × 60 × 300 mm21 × 6 × 30 cm8.27 × 2.36 × 11.81 in / ″
Length: 210 mmWidth: 60 mmHeight: 300 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Glue flap angle
Bevel at the ends of the glue flap; facilitates folding and erection.
Thumb notch
Semicircular opening at the front edge for easy opening.
Thumb notch radius
Radius (= depth) of the thumb notch.
Frequently asked questions
At which ends are the thumb notches?
The template places thumb notches at both open ends of the top. thumbNotch toggles them together, and thumbNotchRadius controls their radius. The fitsFront constraint preserves material to the wall creases and between notches. Also check whether artwork or the inner part covers the intended grip location.
How much clearance does a tray need?
The source code provides no universally approved allowance for any inner part. Measure its finished outside dimensions including material layers and gluing. Determine the required sliding clearance with the target material in a complete sample. The sleeve's inside dimensions alone predict neither insertion force nor behavior after multiple sliding cycles.
Does the sleeve have a bottom closure?
No. It is a tube with a glued seam and two open ends. An inner part or the product slides inside. Closing one end or securing against falling out requires a separate construction or securing measure. This V1 includes neither bottom flaps nor an integrated end stop for that purpose.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
See problems before you pass on files
Export and handover
Files your printer can follow
Related templates
Self-seal shipping box
Corrugated shipping box with fully overlapping lid flaps, self-seal closure, and tear strip. The bottom is closed with tape as on a regular slotted box; the upper closure has adhesive strips and an opening aid.
corrugated.shipper.selfsealView template
Mailer with locking tabs
Corrugated mailer with double side walls and an external tuck closure. The lid's locking tabs engage through oblong slots in the front wall; the construction is erected without gluing.
corrugated.mailer.lockView template
Mailer with closure flap
Mailer with double side walls and an external closure flap. A self-adhesive strip connects the flap to the front wall; a tear strip opens it. The bottom locking tabs still hold the wall structure.
corrugated.mailer.flapView template
Book wrap
Cross-shaped wraparound packaging for books and flat goods. Additional crease lines allow folds for thinner contents; end walls and lid end flaps close the sides, and an adhesive strip closes the front.
corrugated.wrapView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app