Labels and bands / JETDIELINE

Wraparound label

Wrap label for cylindrical bottles and cans: length from circumference (or diameter) plus overlap; the front viewing area and overlap are marked as annotation lines.

Wraparound label — Dieline preview of the documented example. Set the dimensions and production material in JetDieline.

Template ID: label.wrap
Construction: Labels and bands
Current template version: V1
Dieline preview version: V1

How it is assembled

Position the label's start (overlap strip) vertically, pull it taut around the body, and glue the end over the start. The front lies opposite the seam.

Material and grain direction

Grain direction parallel to the band height, across the circumference (check)

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Compare labels, cup carriers and bottle packaging. Circumference and openings must fit the container. Print mockups of beverage cartons do not demonstrate liquid-tightness.

Dimensions of the illustrated example

70 × 90 mm

7 × 9 cm2.76 × 3.54 in / ″

Diameter: 70 mmHeight: 90 mm

Outside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Front viewing area

Angle of the area visible from the front, measured around the body axis; marked as annotation lines opposite the seam.

Frequently asked questions

Can I enter circumference instead of diameter?

Yes. The dimension model accepts a circumference or diameter. If both are given, entered circumference and π times diameter must differ by no more than 0.1 mm. Measure at the area of the container that the label will actually wrap around.

How long is the starting label?

The circumference calculated from Ø 70 mm is 219.911 mm. With 8 mm overlap, the length is 227.911 mm. Height remains 90 mm. Overlap is already included in the blank and is not added again as bleed.

Are viewing area lines creases?

No. Seam and viewing area are annotation lines for design. The label wraps around a cylindrical body and has no crease. The front viewing area parameter changes this marking, not the diameter or outline length.