Corrugated shipping boxes / JETDIELINE

Corrugated sheet with creases

Rectangular corrugated sheet with zero to three evenly spaced creases. Without creases, it serves as a flat layer pad; folded, it forms an angle, U-profile, or wrap around a product.

Shipping Office and storage

Corrugated sheet with creases — Dieline preview of the documented example. Set the dimensions and production material in JetDieline.

Interactive 3D fold view

03 / BOX

Simplified display model with indicative material thickness, not to scale.

Template ID: corrugated.sheet
Construction: Corrugated shipping boxes
Current template version: V1
Dieline preview version: V1

How the shape is constructed

Rectangular corrugated blank with zero to three evenly spaced creases: flat as a layer pad or cushioning, folded as an angle, U-profile, or wrap around a product.

How it is assembled

Use the sheet flat or fold inward along the creases and place it around the product; close a wrap with tape or strapping.

Material and grain direction

Flutes parallel to the creases (vertical on the blank): creases pre-break cleanly (check with the test print shop).

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Dimensions of the illustrated example

800 × 300 mm

80 × 30 cm31.5 × 11.81 in / ″

Width: 800 mmHeight: 300 mm

Inside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Crease count

Number of evenly spaced creases parallel to the height: 0 flat, 1 angle, 2 U-profile, 3 wrap; each panel remains at least 20 mm wide.

Frequently asked questions

What dimension does 800 × 300 mm describe?

These are the width and height of the unfolded sheet. They are flat dimensions, not the inside dimensions of a finished box. Crease count and even division determine the final folded shape. Check the folded sheet around your product before deriving its inside space from one third of the width.

Can I set unequal panel widths?

No. sheetCreaseCount selects zero to three evenly spaced creases. Custom positions or unequal panels are not parameters in V1. If the product needs asymmetric folds, this construction may not be suitable. Moving lines afterward would not be a validated parameter state of this template.

What shape do two creases produce?

Two creases divide the sheet into three panels and form a U-profile in the intended folding model. One crease produces an angle, three a wrap; without creases, the sheet remains flat. Actual fit and foldability depend on the material and product and are checked on the sample.