Rigid boxes / JETDIELINE

Magnetic closure box – tray wrap

Wrapping paper for the tray: cross with corner flaps and turn-ins; covers the magnet in the front wall.

Magnetic closure box – tray wrap — Dieline preview of the documented example. Set the dimensions and production material in JetDieline.

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: rigid.magnetic.tray.wrap
Component: Rigid boxes
Current template version: V1
Dieline preview version: V1

This template is a component of a packaging assembly. Match its dimensions to the other parts; lids, bases, wraps and linings serve different purposes.

How it is assembled

Apply adhesive over the entire wrap and center the shell on it. Fold up the front and back walls, wrap the corner flaps around the edges, glue the end walls over them, and fold the turn-ins inward.

Material and grain direction

Grain direction of greyboard and wrapping paper parallel to the x-axis of the blank: the long grooves fold cleanly, and board and paper do not warp against each other during wrapping (check with the rigid box manufacturer).

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Compare opening and presentation: pillow shapes, bands, drawers or lift-off lids. Plan the fit of contents and inserts and allow clearance between moving parts.

Dimensions of the illustrated example

200 × 150 × 50 mm

20 × 15 × 5 cm7.87 × 5.91 × 1.97 in / ″

Length: 200 mmWidth: 150 mmHeight: 50 mm

Inside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Greyboard thickness

Thickness of the greyboard around which the wrap is folded; the assembly sets it from the greyboard material.

Turn-in

Depth to which the wrap folds inward over the top edge, measured from the inside edge.

Corner flap

Width of the flaps that wrap around the vertical edges and are covered by the adjacent wall wrap.

Frequently asked questions

What does the separate inside lining do?

The inside lining covers the case wrap's turn-ins and the magnet in the flap. It is smaller than the case all around; liningMargin starts at 3 mm. Its hinge lines follow the case. Check glue application and movement on the sample so the lining neither strains nor blocks the hinges when closing.

Which magnet size does the example show?

The individual part's starting value is a disc magnet with a 10 mm diameter. The model creates a 10.5-mm recess in the tray's front wall and flap. Diameter and position are construction values. A fitting opening determines neither magnet thickness within the material nor holding force or polarity. Confirm the magnet, flush installation, and adhesive with the rigid box manufacturer carrying out the work.

Why is the tray's magnet height initially 25 mm?

25 mm is the parameter default for the individually calculated tray template and belongs to the existing preview. The assembly overrides it to match the flap; in the starting case, with 22.8 mm. This distinction matters for assembly. Do not transfer independently calculated magnet positions into a finished assembly without checking their alignment.