JetDielineGlue flap
Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Folding cartons / JETDIELINE
Reverse tuck-end carton
The top tuck flap is attached to the front, the bottom one to the back. The reverse tuck end carton calculates its walls, dust flaps, and closures from the inside dimension. The dieline shown comes from Version 3 with the hanging hole disabled; artwork, production dieline, and report can be exported together in the technical core.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
carton.tuckend.reverse- Construction
- Folding cartons
- Current template version
- V3
- Dieline preview version
- V3
How the shape is constructed
Glue flap, left side, front, right side, and back form the body. Unlike the straight variant, the bottom tucks in from the back. Dust flaps close from the sides underneath the tuck flaps. This changes bottom arrangement and artwork reading orientation; the arrangement does not promise lower material consumption.
How it is assembled
Pre-break the blank along all creases. Glue the glue flap to the inside of the opposite wall and flatten the carton. Erect for filling, fold in the dust flaps, and insert the tuck flaps from the front and back.
Material and grain direction
Grain direction parallel to the height: wall creases run along the grain direction and fold cleanly (check with the test print shop).
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
55 × 55 × 125 mm5.5 × 5.5 × 12.5 cm2.17 × 2.17 × 4.92 in / ″
Length: 55 mmWidth: 55 mmHeight: 125 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Glue flap angle
Bevel at the ends of the glue flap; facilitates folding and erection.
Tuck depth
How far the tuck flap reaches into the box; at most approximately half the width (the height for the mailer).
Tuck flap radius
Corner radius of the tuck flap; limited by half the flap width or tuck depth.
Tuck flap shoulder
Side inset of the tuck flap relative to the lid, allowing easy insertion.
Frequently asked questions
Where is the lower tuck flap attached?
It is attached to the back; the upper one remains at the front. The closures therefore tuck in from opposite walls. For artwork, inspect the bottom panel and its reading orientation on the erected sample. A printed design for the straight variant therefore cannot be transferred to the reverse arrangement without checking.
When do I need the dust flap relief cut?
V2 and V3 include dustFlapRelief. This clearance separates the dust flap and lid along the crease and must suit material thickness and the machine minimum. Do not reduce it solely to pack the outline more tightly. Check the relief cut during pre-breaking and folding in the lower flaps with the final board.
Is the hanging hole always present?
No. Version 3 starts with hangHole=none. Only a different selection creates the header at the back and the corresponding cutout. Width, height, or diameter depend on hole shape. Check the remaining webs and actual hanging on the sample; the export confirms no load capacity.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
See problems before you pass on files
Export and handover
Files your printer can follow
Related templates
Sleeve
The sleeve surrounds a product with four walls and remains open at both ends. Length and width describe the cross section; height denotes sleeve length. The dieline shows version 1 with finger notches on the front. Material thickness, glue flap, and notch position remain part of the calculation rather than simple scaling.
carton.sleeveView template
Folding carton with snap-lock bottom
The snap-lock bottom closes with four interlocking flaps. Two side flaps lie inside; a tab at the back tucks under the tongue of the front flap. Version 1 combines this bottom with a tuck lid. The calculated example uses folding carton board 400 g/m² and shows the flat dieline with creases and bottom slits.
carton.snaplockView template
Pillow box
The pillow box curves two wall surfaces between lens-shaped end flaps. Curved creases create the closure instead of straight lid creases. In version 1, the inputs mean the package's width × thickness × length. The shown dieline accounts for these proportions and the starting material; it does not define a rectangular box interior.
carton.pillowView template
Hinged-lid carton
The hinged lid sits on the back wall and lays its front wall over the outside of the front. A lid flap inserts through a slot in the front; a tuck bottom closes the base. The page shows version 2 with the hanging hole disabled. The technical core calculates lid overhang, flaps, and creases from the chosen dimensions and material profile.
carton.hinged.lidView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app