JetDielineSide seal
Width of the seal on the left and right; it runs through all layers and remains free of important print content.
Pouches and print layouts / JETDIELINE
Stand-up pouch (Doypack)
The stand-up pouch receives a print mask comprising the front, inserted W-shaped bottom gusset, and back. Side seam, top seam, Doyen corners, and zipper band remain documented as seal zones. Pouch width and height are outside dimensions; the bottom gusset is a separate parameter. The calculated print sheet does not yet confirm standing stability.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
pouch.standup- Construction
- Pouches and print layouts
- Current template version
- V1
- Dieline preview version
- V1
How the shape is constructed
Twice the bottom gusset depth lies between the front and back. The print sheet therefore follows 2 × height + 2 × bottom gusset. The center fold edge turns the W-gusset inward. Doyen corners mark the bottom seal areas. Zipper and tear notch are enabled in the starting state; a hanging hole is optional.
How it is assembled
Print the film, insert the bottom gusset inward and seal it with the Doyen corners, seal in the zipper, and close the side seams. Seal the top seam after filling.
Material and grain direction
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Compare labels, cup carriers and bottle packaging. Circumference and openings must fit the container. Print mockups of beverage cartons do not demonstrate liquid-tightness.
Dimensions of the illustrated example
160 × 230 mm16 × 23 cm6.3 × 9.06 in / ″
Width: 160 mmHeight: 230 mm
Outside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Top seal
Height of the top seal, sealed after filling; with a hanging hole, at least the hole height plus twice 3 mm.
Bottom gusset
Depth of the inserted bottom gusset (half the standing area); at most one-third of the height and half the width.
Zipper
Resealable press-to-close zipper; the zipper band is a seal zone.
Zipper distance
Distance from the zipper center to the top edge; the zipper sits below the top seal and above the bottom fold. Active when the zipper is enabled.
Frequently asked questions
Why is the print sheet taller than twice the pouch height?
The inserted W-shaped bottom gusset is added to the front and back. The model uses twice the bottom gusset depth for this. In the starting example, 230 mm height and a 40 mm bottom gusset produce a total print sheet height of 540 mm. The extra 80 mm are not a top seam allowance. Record pouch dimensions, bottom parameters, and sheet dimensions separately during handoff.
Can I increase the bottom gusset without limits?
No. The rules limit it to 33 % of pouch height and half the pouch width. A deeper bottom gusset also reduces the space below the zipper. Check bottom and closure parameters together. Valid geometry does not confirm standing stability; the filled sample must be tested with the intended film and target contents.
Is the zipper required?
The zipper is enabled in the starting state but can be disabled. Its distance setting depends on this switch. The top seam remains the sealed seam after filling; the zipper is an additional press-to-close closure. Adapt artwork and tear notch to the chosen structure and coordinate the closure design with the converter.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
See problems before you pass on files
Export and handover
Files your printer can follow
Related templates
Flat pouch (3-side seal)
This template calculates the print mask for a flat pouch with a three-side seal. Front and back share one print sheet with a bottom fold. Side and top seams are seal zones; optional additions include a zipper, tear notch, and hanging hole. The drawing is not an approved die-cutting contour for film.
pouch.flatView template
Spout pouch
The spout pouch print mask adds a sealed-in spout to the stand-up pouch. Choose the top right corner or the center of the top edge and enter the inside diameter. The spout's boat-shaped flange is part of the seal zones; the drawing documents its position, not confirmed component fit.
pouch.spoutView template
Drink pouch
The drink pouch template shows a stand-up bottom print mask with a marked straw puncture point on the front. The starting profile has a wider top seal than the simple stand-up variant. Width, height, bottom gusset, and puncture point are set separately; calculated fill volume is not part of the model.
pouch.drinkView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app