JetDielineGlue flap
Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Folding cartons / JETDIELINE
Straight tuck-end carton
Blank, creases, and flaps are calculated from inside dimensions. The result is an artwork PDF, production dieline, and production sheet for the print shop.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model with indicative material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
carton.tuckend.straight- Construction
- Folding cartons
- Current template version
- V3
- Dieline preview version
- V2
How the shape is constructed
From left to right: glue flap, left side, front, right side, and back. Both tuck flaps are attached to the front. Dust flaps are on the sides.
How it is assembled
Pre-break the blank along all creases. Glue the glue flap to the inside of the opposite wall and lay the carton flat. Erect for filling, fold in the dust flaps, and insert the tuck flaps.
Material and grain direction
Grain direction parallel to height (check)
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
55 × 55 × 125 mm5.5 × 5.5 × 12.5 cm2.17 × 2.17 × 4.92 in / ″
Length: 55 mmWidth: 55 mmHeight: 125 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Glue flap angle
Bevel at the ends of the glue flap; facilitates folding and erection.
Tuck depth
How far the tuck flap reaches into the box; at most approximately half the width (the height for the mailer).
Tuck flap radius
Corner radius of the tuck flap; limited by half the flap width or tuck depth.
Tuck flap shoulder
Side inset of the tuck flap relative to the lid, allowing easy insertion.
Frequently asked questions
What distinguishes straight and reverse tuck-end cartons?
In a straight tuck-end carton, both tuck flaps are attached to the front. In the reverse construction, the lower flap is attached to the back. This changes the closure and the reading direction of individual panels. Therefore check artwork and filling workflow on the appropriate construction.
Which inside dimensions do I need for a 50 ml jar?
Fill volume does not determine the jar's outside dimensions. Measure diameter and total height, including the closure. Required clearance depends on insertion, material, and a possible insert. Final inside dimensions cannot be specified without this information; confirm them on a sample.
How large does the glue flap need to be?
The parameter range and starting value appear in the table. The minimum in the material profile is also decisive. Adhesive, production workflow, and material may impose further requirements. MFG-001 flags a glue flap that is too narrow; confirm the final width with your print shop.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
See problems before you pass on files
Export and handover
Files your printer can follow
Related templates
Reverse tuck-end carton
The top tuck flap is attached to the front, the bottom one to the back. The reverse tuck end carton calculates its walls, dust flaps, and closures from the inside dimension. The dieline shown comes from Version 3 with the hanging hole disabled; artwork, production dieline, and report can be exported together in the technical core.
carton.tuckend.reverseView template
Folding carton with crash-lock bottom
The pre-glued crash-lock bottom closes as the body is erected. Dust flaps and a tuck flap close the top of the folding carton; bottom gluing is part of the production workflow.
carton.crashlockView template
Folding carton with snap-lock bottom
The snap-lock bottom closes with four interlocking flaps. Two side flaps lie inside; a tab at the back tucks under the tongue of the front flap. Version 1 combines this bottom with a tuck lid. The calculated example uses folding carton board 400 g/m² and shows the flat dieline with creases and bottom slits.
carton.snaplockView template
Tuck-end carton with window
The window carton combines straight tuck closures with a front cutout. Choose a rectangle with corner radius or an oval and leave room for the film margin and bridges. The shown version 2 starts with a rectangular window and no hanging hole. The dieline provides the construction; window film is patched separately on the inside.
carton.windowView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app