JetDielineGlue flap
Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Folding cartons and inserts / JETDIELINE
Tissue box
Horizontal box for facial tissues and handkerchiefs: body with side seam, ends with glued closures (Seal End), dispensing opening in the top as a perforation (slot or rectangle) with a thumb notch. Dimensions: length × top width × height.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
carton.tissue- Construction
- Folding cartons and inserts
- Current template version
- V1
- Dieline preview version
- V1
How the shape is constructed
The seal-end body lies horizontally: top, side, bottom, and side run around the box length. Both ends are glued. The top has a perforated dispensing window with an optional thumb notch.
How it is assembled
Pre-break the blank, glue the side seam inside, and flatten. Erect, fold in the dust flaps and inner flap at one end, and glue down the outer flap; fill and close the second end the same way. To open, press in the thumb notch and tear out the window along the perforation.
Material and grain direction
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
240 × 120 × 90 mm24 × 12 × 9 cm9.45 × 4.72 × 3.54 in / ″
Length: 240 mmWidth: 120 mmHeight: 90 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Glue flap angle
Bevel at the ends of the glue flap; facilitates folding and erection.
Dust flap length (ratio)
Dust flap length as a ratio of the available length.
Dust flap angle
Bevel of the dust flaps (also the ears on the mailer); larger angles prevent collisions during folding.
Dust flap relief cut
Distance between dust flap and lid along the crease; at least the material thickness. The machine requires a minimum slot width.
Frequently asked questions
Which dimensions describe the top?
Length and width refer to the tissue box's top, the third input to its height. Internally, the construction rearranges the axes for the horizontal seal-end body. Do not read the inputs as the sequence of flat wall strips. The flat starting size shown is 240 × 120 × 90 mm inside dimension.
Is the dispensing opening already fully cut out?
The top has a perforated tear-open opening. On first opening, press in the thumb notch and remove the window along the perforation. The geometry uses the material profile's perforation values. This template does not construct a film that holds individual tissues; that requires separate coordination with the print shop.
How do slot and rectangle differ?
The slot has fully rounded ends. The rectangle uses an 8 mm corner radius, limited by opening width. Both shapes are set using length and width ratios. At least a 5 mm web must remain to the top panel crease; a wide opening therefore cannot grow arbitrarily to the edge.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
See problems before you pass on files
Export and handover
Files your printer can follow
Related templates
Seal-end carton
Folding carton with a side seam and glued top and bottom closures (Seal End) in place of tuck flaps: outer flap at the front, inner flap at the back, dust flaps at the sides. For pharmaceuticals and food; opened by tearing.
carton.sealendView template
Insert with cutout
Paperboard insert for a box: a platform with a product cut-out (rectangle, circle, or oval, freely positioned) on folded legs at two or four edges, optionally with inward-folded leg flaps. Dimensions: outside dimensions of the insert (inside dimensions of the box) × platform height.
carton.insert.cutoutView template
Telescopic box (folding carton) – base
Lower part of the folding carton telescope box: base with four walls and glued corner flaps, same construction as the corrugated telescope box, for smaller gift and chocolate boxes.
carton.telescope.baseView template
Telescopic box (folding carton) – lid
Telescope lid made of folding carton board, with the same construction as the base; dimensions derived from the base's outside dimension plus clearance per side.
carton.telescope.lidView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app