JetDielineFlap gap
Gap between neighboring flaps or walls; at least approximately the material thickness.
Corrugated shipping boxes / JETDIELINE
Book wrap
Cross-shaped wraparound packaging for books and flat goods. Additional crease lines allow folds for thinner contents; end walls and lid end flaps close the sides, and an adhesive strip closes the front.
CutFold
Drag to rotate
Interactive 3D fold view
03 / BOX
Simplified display model without material thickness, not to scale.
The 3D view is not available in this browser. The image shows the folded shape.
- Template ID
corrugated.wrap- Construction
- Corrugated shipping boxes
- Current template version
- V1
- Dieline preview version
- V1
How the shape is constructed
Cross-shaped corrugated blank for books and flat goods: bottom, front and back walls, lid with closure flap and self-adhesive strip, end walls, and lid end flaps; multiple creases for contents of different thicknesses.
How it is assembled
Place the contents on the bottom, erect the front and back walls and end walls – for thinner contents, fold at one of the additional crease lines. Close the lid, place the lid end flaps over the end walls on the outside, remove the release liner, and press the closure flap onto the outside of the front wall.
Material and grain direction
Flute direction parallel to the bottom, wall, and lid creases: the circumferential folds and multiple creases pre-break cleanly (check with the test print shop).
Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.
Dimensions of the illustrated example
240 × 170 × 40 mm24 × 17 × 4 cm9.45 × 6.69 × 1.57 in / ″
Length: 240 mmWidth: 170 mmHeight: 40 mm
Inside dimension
These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.
What to consider for this construction
Closure flap depth
Depth of the closure flap glued to the outside of the front wall; no deeper than the front wall is high.
Closure adhesive strip
Width of the self-adhesive strip on the closure flap (5 mm margin to the edge).
Lid end flaps
Length of the lid end flaps as a proportion of height; they lie over the end walls on the outside.
Additional crease lines
Number of additional crease lines per wall (multiple creases): for thinner contents, fold at these instead of the nominal position.
Frequently asked questions
Are the additional creases continuously adjustable?
No. The parameter sets zero to three additional lines per wall, with shared crease spacing. During packing, you choose an existing line. This is a discrete folding choice. Adapt the base height to the thickest contents and check thinner contents at the intended additional creases.
Why are two additional creases invalid at a low height?
Count multiplied by crease spacing may occupy at most half the inside height. This leaves sufficient wall height in the model. The constraint halfDepth suggests a lower count when there are too many creases. Check count and spacing together; the parameter range alone does not guarantee a suitable combination.
How do the ends close?
First, erect the end walls at the bottom. After closing the lid, the lid end flaps lie over them on the outside. endFlapRatio controls their length as a proportion of height. Test the overlap also when folding at an additional crease, because thinner contents change the final fit.
Related features
Templates and dimensions
Find the right packaging shape and fit it to your product
Designer
Design the artwork directly on the real dieline
Checks
See problems before you pass on files
Export and handover
Files your printer can follow
Related templates
Divider insert
Divider insert made of longitudinal and cross strips with interlocking slots to half their height. All strips lie on a shared sheet and remain connected by nicks until stripping.
corrugated.dividerView template
Insert pad
Flat insert pad used as a base, layer, or top pad in a box. The flat dimensions follow the box's inside space; side clearance makes the pad smaller. An optional grid creates identical rounded cut-outs.
corrugated.insert.padView template
Carry box with hand hole
Corrugated carry-handle box with a snap-lock bottom. Two fully overlapping lid flaps have aligned handle cutouts and are glued over their full area; an additional handle is not part of the construction.
corrugated.handleView template
Corrugated sheet with creases
Rectangular corrugated sheet with zero to three evenly spaced creases. Without creases, it serves as a flat layer pad; folded, it forms an angle, U-profile, or wrap around a product.
corrugated.sheetView templateYour product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app