Envelopes and cards / JETDIELINE

Header Card

Header card folded over a bag's edge and stapled or glued, with a hanging hole through both layers (Euro slot, round hole, or slot). Dimensions are the folded final format.

Retail

Interactive 3D fold view

03 / BOX

Simplified display model without material thickness, not to scale.

Template ID: card.header
Construction: Envelopes and cards
Current template version: V1
Dieline preview version: V1

How the shape is constructed

The header card has two layers of equal height connected by a horizontal center crease. The hanging hole is mirrored across the crease and aligns through both layers after folding. The free bottom corners can be rounded.

How it is assembled

Fold at the fold line, place over the bag edge, and staple or glue. The two holes align exactly.

Material and grain direction

Grain direction horizontal on the blank (check)

Test fit, folding and closure on a sample made from the intended material. Confirm material thickness, grain direction and production steps with your printer.

Dimensions of the illustrated example

100 × 40 mm

10 × 4 cm3.94 × 1.57 in / ″

Width: 100 mmHeight: 40 mm

Outside dimension

These dimensions describe the preview, not a fixed packaging size. The app recalculates the dieline for your own dimensions.

What to consider for this construction

Hanging hole

Hole for hanging on a retail shelf: Euro slot (elongated slot with a round hole above), round hole, or slot. On cartons and the gift card holder, it is centered in a header above the top edge.

Hole width

Width of the elongated slot in the Euro slot and slot options.

Slot height

Height of the elongated slot in the Euro slot and slot options; the ends are semicircular.

Hole diameter

Diameter of the round hole or circle above the elongated slot in the Euro slot; larger than slot height for the Euro slot.

Hole distance

Distance from the hole center to the fold; at least a 3 mm bridge remains to the fold and bottom edge.

Frequently asked questions

How large is the card before folding?

The input describes the folded final format. In the starting example, this is 100 × 40 mm; the open blank is 100 × 80 mm. The center crease connects both layers. Place front and back content using these panels so text reads in the correct direction after folding.

Which hole shapes can I set?

hangHole offers Euro slot, round hole, and slot. Hole width and slot height apply to elongated slot shapes; diameter applies to the round hole and circular part of the Euro slot. Check the applicable parameters and resulting bridge when changing shape. The starting example uses the Euro slot.

What does a hole distance of 12 mm mean?

headerHoleDistance is the distance from the hole center to the center crease. The free material bridge also depends on the entire hole shape. The layout requires clearance from the crease and bottom edge. A larger hole can therefore leave too little bridge despite an unchanged center point.