JetDielineLabel sheet
Sheet with multiple identical labels in columns and rows; the labels are kiss-cut, and the liner remains intact.
label.sheet.layoutView templateJETDIELINE / Templates
Office and storage
Sleeves, folders, cards and archive boxes hold paper and other flat contents. Account for the thickness of the full stack and check openings, handle areas and lid clearance.
14Constructions, components and assemblies
Individual components are shown separately. Different sizes and stored template versions are not additional packaging shapes.
label.sheet.layoutExplore by packaging shape or application
Dispenser carton with tear-out window
Reverse tuck end carton with a perforated tear-open window in the front and a thumb notch as an opening tab; after opening, contents are removed individually.
carton.dispenserView template
Book wrap
Cross-shaped wraparound packaging for books and flat goods. Additional crease lines allow folds for thinner contents; end walls and lid end flaps close the sides, and an adhesive strip closes the front.
corrugated.wrapView template
Card sleeve
Flat sleeve for gift, loyalty, or greeting cards: front with a thumb cutout at the opening, back at the bottom crease, side seams formed by glue flaps, and an optional closure flap. Dimensions are the card's insertion dimensions; the sleeve grows with clearance and flaps.
card.sleeveView template
Presentation folder with pocket
Folder made from front and back covers with a spine and a pocket on the right, left, or both sides; pockets carry glue flaps on both sides, with optional business card slots. Dimensions refer to the finished size of the closed folder.
folder.pocketView template
Envelope with side flaps
Envelope or pocket envelope comprising address panel, two side flaps, bottom flap as the back, and closure flap. Dimensions are the finished size; the opening is at the top edge.
envelope.pocketView template
Wallet envelope with side flaps
Envelope with an opening on the long side: address panel, two side flaps, bottom flap as the back, and a straight or pointed closure flap. Dimensions refer to the finished size; starting sizes DL, C6, C5, C4, and US No. 10.
envelope.walletView template
CD sleeve
Flat sleeve for a CD or DVD with a round window (optionally without), side seams formed by glue flaps, a closure flap on the back, and an optional thumb notch. Dimensions refer to the insert; clearance and flaps make the sleeve larger.
envelope.cdView template
Folded card
Folded card with a single fold (two panels), roll fold (three panels, with a slightly narrower inner flap), or gate fold (center with two wings). Dimensions refer to the folded finished size.
card.foldView template
Corrugated sheet with creases
Rectangular corrugated sheet with zero to three evenly spaced creases. Without creases, it serves as a flat layer pad; folded, it forms an angle, U-profile, or wrap around a product.
corrugated.sheetView template
Tissue box
Horizontal box for facial tissues and handkerchiefs: body with side seam, ends with glued closures (Seal End), dispensing opening in the top as a perforation (slot or rectangle) with a thumb notch. Dimensions: length × top width × height.
carton.tissueView template
Archive box – base
Base of the archive box: corrugated half slotted container, open at the top, four bottom flaps like the slotted box, a handle hole (slot) in both end walls.
corrugated.archive.baseView template
Archive box – lid
Telescope lid of the archive box: shallow tray of bottom and four walls with glued corner flaps; in the assembly sized from the outside dimensions of the base plus clearance per side.
corrugated.archive.lidView template
Archive box with lid
Archive and storage box in corrugated board with matching base and telescope lid. The base is open at the top and has hand holes in both end walls. Clearance per side and lid height determine the fit; the starting dimensions suit A4 documents.
corrugated.archiveView templateNo matching template. Change your search or application.
Your product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app