JetDielineRegular slotted container
The regular slotted container connects four walls, a glue flap, and four flaps each at the top and bottom. Its outer flaps meet in the middle; the reference is similar to FEFCO 0201.
corrugated.rscView templateJETDIELINE / Templates
Beverages
Compare labels, cup carriers and bottle packaging. Circumference and openings must fit the container. Print mockups of beverage cartons do not demonstrate liquid-tightness.
26Constructions, components and assemblies
Individual components are shown separately. Different sizes and stored template versions are not additional packaging shapes.
corrugated.rscExplore by packaging shape or application
Rectangular label
Rectangular label with selectable corner radius; dieline with bleed and safety zone from the production profile.
label.rectView template
Wraparound label
Wrap label for cylindrical bottles and cans: length from circumference (or diameter) plus overlap; the front viewing area and overlap are marked as annotation lines.
label.wrapView template
Neck label
Neck label for a conical bottle neck as a conical blank from top and bottom diameter and height; as a closed ring with overlap or a partial label.
label.neckView template
Wraparound label for tapered cups
Wrap label for tapered cups and cans as a cone blank (annular sector) with a constant-width glue strip.
label.tapered.wrapView template
Paper band
Paper wrap band around a round body or a stack: length from circumference plus ease allowance and overlap; the overlap at the beginning is the glue area.
band.wrapView template
Wrap for can or tube
Calculate the wrap from diameter or circumference, height, and overlap. Slit turn-ins are added for a cardboard tube; for a can, you can disable both. The drawing shows the blank with starting values, not a finished can or confirmed fit.
tube.wrapView template
Lid or base disc with tabs
The lid or base disc has glue flaps around a circular crease line. The starting dimensions are the inside diameter of the tube wall and its height. The parametric dieline shows the disc as an individual component; check a matching tube wall and assembly separately.
tube.discView template
Cone wall for cups
Calculate the conical sidewall blank of a paperboard cup from rim diameter, bottom diameter, and finished height. The annular sector includes the glue seam and separate allowances for the bottom curl and top rolled rim.
cone.cup.wrapView template
Gusseted bag with block bottom
The side-gusset bag has a glued longitudinal seam and a block bottom made of flaps, ears, and triangles. You set bag width, gusset depth, and height. The inside dimension shown is converted into crease-to-crease dimensions using the material profile; the flat dieline also includes the bottom overlap.
bag.gussetView template
Divider insert
Divider insert made of longitudinal and cross strips with interlocking slots to half their height. All strips lie on a shared sheet and remain connected by nicks until stripping.
corrugated.dividerView template
Cup sleeve
The cup sleeve is an annular sector with a glue flap for an existing tapered cup. You measure the diameters at the top and bottom edges of the sleeve and its vertical height.
sleeve.cupView template
Slotted container with meeting inner flaps
The inner flaps meet in the center and close the opening. Outer flaps with an adjustable gap sit above them; our construction calculates both flap layers together.
corrugated.rsc.innerfullView template
Carry box with hand hole
Corrugated carry-handle box with a snap-lock bottom. Two fully overlapping lid flaps have aligned handle cutouts and are glued over their full area; an additional handle is not part of the construction.
corrugated.handleView template
Stand-up pouch (Doypack)
The stand-up pouch receives a print mask comprising the front, inserted W-shaped bottom gusset, and back. Side seam, top seam, Doyen corners, and zipper band remain documented as seal zones. Pouch width and height are outside dimensions; the bottom gusset is a separate parameter. The calculated print sheet does not yet confirm standing stability.
pouch.standupView template
Spout pouch
The spout pouch print mask adds a sealed-in spout to the stand-up pouch. Choose the top right corner or the center of the top edge and enter the inside diameter. The spout's boat-shaped flange is part of the seal zones; the drawing documents its position, not confirmed component fit.
pouch.spoutView template
Drink pouch
The drink pouch template shows a stand-up bottom print mask with a marked straw puncture point on the front. The starting profile has a wider top seal than the simple stand-up variant. Width, height, bottom gusset, and puncture point are set separately; calculated fill volume is not part of the model.
pouch.drinkView template
Cup carrier
One-piece folding carton carrier for 2 or 4 cups: base, front and back wall, two hole decks holding the cups and a double handle from the blank. Ends open.
carrier.cupView template
Bottle carrier
One-piece folding carton carrier for 4 or 6 bottles with two hole decks and a handle from the blank; with a divider as an assembly (carrier with divider), strips also separate the bottles below the deck.
carrier.bottleView template
Pallet display (shell)
Shell of a corrugated pallet display for a quarter or half pallet: tube of four walls with glue flap, large shelf opening in the front between plinth and top header (advertising area). The shelves are stacked in from above.
corrugated.display.palletView template
Pallet display shelf
Stackable corrugated shelf: base with raised rims, open corners and a low front lip as price rail. Dimensions: inside cross-section of the shell × shelf height.
corrugated.display.pallet.shelfView template
Gable-top beverage carton (print mock-up)
Milk-carton shape with a glued longitudinal seam, tuck bottom, triangular gable folds and a glueable top strip. The template is a print layout and dieline made from folding carton board. It is not designed as liquid-tight or aseptic packaging.
carton.gable.topView template
Cup carrier with divider
Cup carrier and slotted divider form one assembly. The carrier has two hole decks and a carrying handle; the crossed strips also separate cups below the decks. The divider follows the internal space and cell count of the carrier.
carrier.cup.dividerView template
Bottle carrier with divider
Bottle carrier for 4 or 6 bottles with a matching slotted divider. Two hole decks and the carrying handle hold the bottles in the carrier; additional strips also separate them below. The divider is derived from the internal space and selected bottle count.
carrier.bottle.dividerView template
Pallet display with shelves
Corrugated shell with a shelf opening, plinth and header, plus matching shelves with price rails. The identical shelves stack in from above. The selected count and shell dimensions together determine the height and fit of the individual levels.
corrugated.display.pallet.shelvesView templateNo matching template. Change your search or application.
Your product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions Download on the Mac App StoreAsk about the app