JetDieline
Straight tuck-end carton
Blank, creases and flaps are calculated from inside dimensions. The outputs are artwork PDF, production dieline and report for the printer.
carton.tuckend.straightView templateJETDIELINE / Templates
Templates
Find the shape that fits your product. Compare constructions, closures and dimension references — from folding cartons to gift packaging with several components.
113Constructions, components and assemblies
Individual components are shown separately. Different sizes and stored template versions are not additional packaging shapes.
corrugated.mailerExplore by packaging shape or application
Reverse tuck-end carton
The top tuck flap sits on the front, the bottom one on the back. The reverse tuck-end carton calculates its walls, dust flaps and closures from the inside dimension. The dieline shown comes from version 3 with the hanging hole disabled; artwork, production dieline and report can be exported together in the technical core.
carton.tuckend.reverseView template
Slotted box
The slotted box combines four walls, a glue flap and four flaps each at the top and bottom. Its outer flaps meet in the middle; the reference is similar to FEFCO 0201.
corrugated.rscView templateMailer box
Shipping box with tuck lid and dust flaps made from E flute or microflute. Inside printing, double walls and size series are part of the same construction.
corrugated.mailerView template
Sleeve
The sleeve surrounds a product with four walls and remains open at both ends. Length and width describe the cross-section; height describes the sleeve length. The dieline shows version 1 with finger notches on the front. Material thickness, glue flap and notch position remain part of the calculation rather than simple scaling.
carton.sleeveView template
Folding tray with interlocking corners
An open corrugated tray with double end walls and interlocking corners. The blank is erected without adhesive; this page shows the custom V2 construction with B flute.
corrugated.trayView template
Folding carton with crash-lock bottom
The pre-glued crash-lock bottom closes as the body is erected. At the top, dust flaps and a tuck flap close the folding carton; gluing the bottom is part of the production workflow.
carton.crashlockView template
Folding carton with snap-lock bottom
The snap-lock bottom closes with four interlocking flaps. Two side flaps sit inside; a nose on the back tucks under the front flap's tongue. Version 1 combines this bottom with a tuck lid. The calculation example uses folding carton board 400 g/m² and shows the flat dieline with creases and bottom cuts.
carton.snaplockView template
Telescopic box – base
Base and lid form a two-piece corrugated construction with glued corner flaps. Both components have their own dieline; the lid is derived from the base's outside dimension and clearance on each side.
corrugated.telescope.baseView template
Telescopic box – lid
Corrugated lift-off lid with the same construction as the base; its dimensions follow the outside dimensions of the base plus clearance per side.
corrugated.telescope.lidView template
Rectangular label
Rectangular label with selectable corner radius; dieline with bleed and safe zone from the production profile.
label.rectView template
Wraparound label
Wraparound label for cylindrical bottles and cans: length from circumference (or diameter) plus overlap; the front viewing area and overlap are marked as annotation lines.
label.wrapView template
Neck label
Neck label for a conical bottle neck as a cone development from top and bottom diameters and height; as a closed ring with overlap or a partial label.
label.neckView template
Wraparound label for tapered cups
Wraparound label for tapered cups and cans as a cone blank (annular sector) with a glue strip of constant width.
label.tapered.wrapView template
Label sheet
Sheet with several identical labels in columns and rows; labels are kiss-cut, leaving the backing intact.
label.sheet.layoutView template
Paper sleeve
Paper wrap band around a round body or a stack: length from circumference plus ease allowance and overlap; the overlap at the beginning is the glue area.
band.wrapView template
Belly band for boxes
Paper belly band around the four walls of a box, with creases at the edges and a glue flap; crease-to-crease dimensions from the box's outside dimensions plus material thickness.
band.bellyView template
Lid and base box – base (greyboard)
Greyboard shell for the base of a rigid box: base with four walls, V-grooves and butt-jointed corners.
rigid.lidbase.baseView template
Lid and base box – lid (greyboard)
Greyboard shell for the lid, constructed in the same way as the base; dimensions from the base outside dimensions plus clearance and paper.
rigid.lidbase.lidView template
Lid and base box – base wrap
Wrapping paper for the base: cross-shaped blank with corner tabs on the front and back walls and turn-ins over the top edge to the inside.
rigid.lidbase.base.wrapView template
Lid and base box – lid wrap
Wrapping paper for the lid, constructed in the same way as the base wrap.
rigid.lidbase.lid.wrapView template
Drawer box – tray (greyboard)
Greyboard tray: tray with V-grooves and butt-jointed corners, optionally with a slot for a ribbon handle in the right end wall.
rigid.drawer.trayView template
Drawer box – sleeve (greyboard)
Greyboard sleeve: strip with three V-grooves, open at both ends, with a butt joint at the lower front edge.
rigid.drawer.sleeveView template
Drawer box – tray wrap
Wrapping paper for the tray: cross with corner flaps and turn-ins, optionally with a slot above the tray's slot.
rigid.drawer.tray.wrapView template
Drawer box – sleeve wrap
Wrapping paper for the sleeve: strip with overlap at the butt joint and turn-ins at both open ends.
rigid.drawer.sleeve.wrapView template
Magnetic closure box – tray (greyboard)
Greyboard tray with V-grooves and butt-jointed corners, with a round magnet recess centred in the front wall.
rigid.magnetic.trayView template
Magnetic closure box – tray wrap
Wrapping paper for the tray: cross shape with corner flaps and turn-ins; covers the magnet in the front wall.
rigid.magnetic.tray.wrapView template
Magnetic closure box – case (greyboard)
Greyboard hinged-lid case: base, spine with spine allowance, lid and front flap in one strip with V-grooves, round magnet recess in the flap.
rigid.magnetic.coverView template
Magnetic closure box – case wrap
Wrapping paper for the case: panel with turn-ins all round, corner cuts at 45° and creases at the joint positions.
rigid.magnetic.cover.wrapView template
Magnetic closure box – inside lining
Lining paper for the inside of the case, smaller all round by the margin; covers the turn-ins and flap magnet.
rigid.magnetic.cover.liningView template
Neck box – base (greyboard)
Greyboard shell for the neck box base: base panel with four walls, V-grooves and butt-jointed corners.
rigid.neck.baseView template
Neck box – base wrap
Wrapping paper for the neck box base: cross shape with corner flaps and turn-ins over the top edge inwards.
rigid.neck.base.wrapView template
Neck box – neck (greyboard)
Greyboard neck: surrounding strip with three V-grooves, joint at the rear right corner; sits in the base and protrudes above it by the neck height.
rigid.neck.neckView template
Neck box – neck wrap
Wrapping paper for the neck: strip with overlap at the joint and turn-ins at the top edge covering the inside down to the base.
rigid.neck.neck.wrapView template
Neck box – lid (greyboard)
Greyboard shell for the neck box lid; dimensions from the base inside dimension plus clearance, height from neck height plus clearance.
rigid.neck.lidView template
Neck box – lid wrap
Wrapping paper for the neck box lid in the same construction type as the base wrap.
rigid.neck.lid.wrapView template
Wrap for can or tube
Calculate the wrap from diameter or circumference, height and overlap. For a cardboard tube, slit turn-ins are added; for a can, you can disable both. The drawing shows the blank with starting values, not a finished can or confirmed fit.
tube.wrapView template
Lid or base disc with tabs
The lid or base disc has glue flaps around a circular crease line. The starting dimension is the cylindrical wall's inside diameter, together with its height. The parametric dieline shows the disc as an individual component; check a matching wall and assembly separately.
tube.discView template
Cone wall for cups
Calculate the conical wall of a paperboard cup from rim diameter, base diameter and finished height. The annular sector includes the glue seam and separate allowances for the bottom curl and top rolled rim.
cone.cup.wrapView template
Flat bag
The flat bag is formed from front and back with two glued side seams and a bottom fold. Enter bag width and height as outside dimensions. An optional flap on the back closes the opening; the dieline shows its effect on the paper blank.
bag.flatView template
Gusseted bag with block bottom
The side-gusset bag has a glued longitudinal seam and a block bottom formed by flaps, ears and triangles. You set bag width, gusset depth and height. The inside dimension shown is converted to crease-to-crease dimensions using the material profile; the flat dieline also includes the bottom overlap.
bag.gussetView template
Carton tray with glued corners
A base, four walls and glued corners form the open folding tray. The page shows V2 with an optional window; in the starting example, the window remains switched off.
carton.tray.gluedView template
Carton tray with interlocking corners
Unglued tray made from folding carton board: front and back walls with corner flaps, double end walls with a return; tabs on the inner wall tuck into slots in the bottom.
carton.tray.lockedView template
Dispenser carton with tear-out window
Reverse tuck-end carton with a perforated tear-out window on the front and a thumb notch as a tear tab; after opening, the contents are removed individually.
carton.dispenserView template
Counter display
Open display for the shop counter: low front wall with finger recess, tall back wall with advertising area, sloping side walls; corners are glued inside with corner glue flaps as on the tray.
carton.display.counterView template
Pillow box
The pillow box bows two wall panels between lens-shaped end flaps. Curved creases form the closure instead of straight lid creases. In version 1, the inputs mean width × thickness × length of the packaging. The dieline shown accounts for these proportions and the starting material; it does not define a rectangular box interior.
carton.pillowView template
Hinged lid carton
The hinged lid sits on the back wall and places its front wall over the outside of the front. A lid tab passes through a slot in the front; a tuck bottom closes the base. This page shows version 2 with the hanging hole disabled. The technical core calculates lid overhang, flaps and creases from the chosen dimensions and material profile.
carton.hinged.lidView template
Tuck-end carton with window
The window carton combines straight tuck closures with a cut-out in the front. Choose a rectangle with corner radius or an oval and leave room for the film margin and bridges. Version 2 shown here starts with a rectangular window and no hanging hole. The dieline provides the construction; window film is attached separately behind the window.
carton.windowView template
Hexagonal carton
Six walls form a hexagonal footprint with tuck lid and bottom. The inputs mean across corners × across flats × height, rather than a rectangle's length and width. Version 1 calculates the angled walls, mitres and creases from these dimensions. The example shows the straight lid style; the bottom can alternatively sit on the back.
carton.hexagonView template
Gable box with handle
The gable box combines a tuck bottom with a pitched roof and glued handle flaps. The page explicitly shows version 1 with a handle hole, roof panels and gussets. The entered height describes the body; gable and handle are added through their own parameters. The calculated dieline is a basis for a folding sample and does not demonstrate a load capacity.
carton.gableView template
Half slotted container
Four walls with a glue flap and bottom flaps, open top: the half slotted container can be used as a shelf box or base. The custom parametric construction calculates only this open box body.
corrugated.halfslottedView template
Full overlap slotted container
The outer flaps each cover the entire opening at the top and bottom and lie on top of each other. This custom corrugated construction calculates full coverage rather than just a narrow overlap strip.
corrugated.rsc.fulloverlapView template
Self-seal shipping box
Corrugated shipping box with fully overlapping lid flaps, self-seal closure and tear strip. The bottom is closed with adhesive tape as on a slotted box; the upper closure has an adhesive strip and opening aid.
corrugated.shipper.selfsealView template
Mailer with locking tabs
Corrugated mailer with double side walls and an external tuck closure. The lid locking tabs engage through oblong holes in the front wall; the construction is erected without gluing.
corrugated.mailer.lockView template
Book wrap
Cross-shaped wrap-around packaging for books and flat goods. Additional crease lines allow folding for thinner contents; end walls and lid end flaps close the sides, an adhesive strip closes the front.
corrugated.wrapView template
Divider insert
Divider insert made from longitudinal and transverse strips with interlocking slots extending halfway down their height. All strips lie on a shared sheet and remain joined by holding nicks until separated.
corrugated.dividerView template
Insert pad
Flat insert pad as a base, intermediate layer or top insert in a box. Flat dimensions follow the box's inside space; side clearance makes the pad smaller. An optional grid forms identical rounded cutouts.
corrugated.insert.padView template
Card sleeve
Flat sleeve for gift, loyalty or greeting cards: front with a thumb cut-out at the opening, back at the bottom fold, side seams formed by glue flaps, optional closure flap. Dimensions are the card's insertion dimensions; clearance and flaps make the sleeve larger.
card.sleeveView template
Presentation folder with pocket
Folder with front and back covers, spine and pocket on the right, left or both sides; pockets have glue flaps on both sides and optional business card slots. Dimensions refer to the finished format of the closed folder.
folder.pocketView template
Envelope with side flaps
Envelope or pocket envelope comprising address panel, two side flaps, bottom flap as the back and closure flap. Dimensions are the finished format; the opening is at the top edge.
envelope.pocketView template
Carrier bag with gussets
Paper carrier bag comprising front, back and two side gussets with longitudinal seam, block bottom, top turn-in as handle reinforcement and die-cut handle holes; dimensions bag width × gusset depth × height. Bottom insert and handles are separate parts.
bag.carrierView template
Custom shape with creases
Blank from your own closed contour (point list, e.g. from an SVG file) with a uniform corner radius and up to four crease lines between contour points; the panels are derived from the crease lines.
custom.polygonView template
Pizza box
The pizza box is made from one blank with double side walls, interlocking corners and a hinged lid. Inside dimensions determine the space for the pizza; ventilation slots and locking tabs are separate parameters.
carton.pizzaView template
Tray with hinged lid (clamshell)
The clamshell tray combines a base with glued corners and a lid hinged to the back wall. You choose a tuck flap or tab-and-slot closure and calculate either from inside or outside dimensions.
carton.tray.hingedView template
Takeout-Box
The takeout box has outward-sloping front and back walls, glued corners and a folding lid with tuck flap. Inside width and outside width have different reference points.
carton.takeoutView template
Cup sleeve
The cup sleeve is an annular sector with a glue flap for an existing tapered cup. You measure the diameters at the top and bottom edges of the sleeve and its vertical height.
sleeve.cupView template
Fries scoop
The fries scoop remains open at the top and has a taller back wall, lower front and sloping sides. Front width, depth and back wall height form the inside dimension; front height is a separate parameter.
carton.friesView template
Popcorn box
The popcorn box is open at the top and has four outward-sloping walls, a side seam and a glued bottom. Length and width describe the upper opening; the base is smaller.
carton.popcornView template
Sandwich wedge
The sandwich wedge forms a triangular prism from a base and two sloping panels, a glued-in back and a hinged lid. Inside dimension describes baseline, prism thickness and triangle height.
carton.wedgeView template
Envelope with side flaps (wallet)
Envelope opening on the long side: address panel, two side flaps, bottom flap forming the back, and a straight or pointed closure flap. Dimensions refer to the finished format; starting sizes DL, C6, C5, C4 and US No. 10.
envelope.walletView template
CD sleeve
Flat sleeve for a CD or DVD with a round window (optionally without), side seams formed by glue flaps, a closure flap on the back, and an optional thumb notch. Dimensions refer to the insert; clearance and flaps make the sleeve larger.
envelope.cdView template
Folded card
Folded card with a single fold (two panels), roll fold (three panels, with a slightly narrower inner flap) or gate fold (centre with two wings). Dimensions refer to the folded finished format.
card.foldView template
Header Card
Header card folded over a bag edge and stapled or glued, with a hanging hole through both layers (Euro hole, round hole or slot). Dimensions are the folded finished format.
card.headerView template
Gift card holder
Folded card or single card with four corner slots (corner pockets) or two side slots for a gift card in credit card format 85.6 × 54 mm; optional header with hanging hole.
card.giftholderView template
Slotted container with overlapping outer flaps
An adjustable strip connects the outer flaps at the top and bottom. The template calculates flap lengths, material layers and blank from the box dimensions and desired overlap.
corrugated.rsc.overlap.outerView template
Slotted container with meeting inner flaps
The inner flaps meet in the middle and close the opening. Outer flaps with an adjustable gap lie over them; the custom construction calculates both flap layers together.
corrugated.rsc.innerfullView template
Slotted container with snap-lock bottom
A snap-lock bottom closes this corrugated box without tape at the bottom. The top can be chosen separately: meeting flaps, fully overlapping flaps or open.
corrugated.rsc.mixedView template
Carry box with hand hole
Corrugated carry-handle box with snap-lock bottom. Two fully overlapping lid flaps have aligned handle cut-outs and are glued across their surfaces; an additional handle is not part of the construction.
corrugated.handleView template
Mailer with closure flap
Mailer with double side walls and an external closure flap. A self-adhesive strip connects the flap to the front wall; a tear strip opens it. The bottom tabs still hold the wall structure.
corrugated.mailer.flapView template
Corrugated sheet with creases
Rectangular corrugated sheet with zero to three evenly spaced creases. Without a crease, it serves as a flat layer pad; folded, it forms an angle, U-profile or wrap around a product.
corrugated.sheetView template
Slide sleeve
Corrugated sliding sleeve with glue flap and open ends. Thumb cut-outs at both ends of the top make sliding out an inner component easier. The template calculates only the sleeve.
corrugated.slideView template
Slotted container with crash-lock bottom
The corrugated box is pre-glued at the factory and supplied flat. The crash-lock bottom closes during erection; the top can have meeting flaps, fully overlapping flaps or an open edge.
corrugated.autobottomView template
Flat pouch (3-side seal)
This template calculates the print mask for a flat pouch with a three-side seal. Front and back are on a shared print sheet with a bottom fold. Side and top seals are seal zones; zipper, tear notch and hanging hole are optional additions. The drawing is not an approved film die-cutting contour.
pouch.flatView template
Stand-up pouch (Doypack)
The stand-up pouch has a print mask comprising front, inserted W-shaped bottom gusset and back. Side seam, top seam, Doyen corners and zipper strip remain documented as seal zones. Pouch width and height are outside dimensions; the bottom gusset is a separate parameter. The calculated print sheet does not yet confirm standing stability.
pouch.standupView template
Spout pouch
The spouted pouch print mask adds a sealed-in spout to the stand-up pouch. Choose the top right corner or the centre of the top edge and enter the inside diameter. The spout fitment is part of the seal zones; the drawing documents its position, not confirmed component fit.
pouch.spoutView template
Drink pouch
The beverage pouch template shows a stand-up print mask with a marked straw puncture point on the front. The top seal in the starting profile is wider than in the simple stand-up variant. Width, height, bottom gusset and puncture point are set separately; a calculated fill volume is not part of the model.
pouch.drinkView template
Seal-end carton
Folding carton with a side seam and glued closures at the top and bottom (Seal End) instead of tuck flaps: outer flap on the front, inner flap on the back, dust flaps on the sides. For pharmaceutical and food products; opened by tearing.
carton.sealendView template
Tissue box
Horizontal box for facial tissues and handkerchiefs: body with side seam, glued end closures (Seal End), perforated dispensing opening in the top (oblong slot or rectangle) with thumb notch. Dimensions: length × top width × height.
carton.tissueView template
Insert with cut-out
Board insert for a box: platform with a freely positioned product cutout (rectangle, circle or oval) on folded-down feet at two or four edges, optionally with inward-folded foot tabs. Dimensions: insert outside dimensions (box inside dimensions) × platform height.
carton.insert.cutoutView template
Telescopic box (folding carton) – base
Lower part of the telescopic box made from folding carton board: base with four walls and glued corner flaps, same design as the corrugated telescopic box, for smaller gift and chocolate boxes.
carton.telescope.baseView template
Telescopic box (folding carton) – lid
Telescopic lid made from folding carton board in the same design as the base; dimensions from the base's outside dimension plus clearance on each side.
carton.telescope.lidView template
Cup carrier
One-piece folding carton carrier for 2 or 4 cups: base, front and back wall, two hole decks holding the cups and a double handle from the blank. Ends open.
carrier.cupView template
Bottle carrier
One-piece folding carton carrier for 4 or 6 bottles with two hole decks and a handle from the blank; with a divider as an assembly (carrier with divider), strips also separate the bottles below the deck.
carrier.bottleView template
Pallet display (shell)
Shell of a corrugated pallet display for a quarter or half pallet: tube of four walls with glue flap, large shelf opening in the front between plinth and top header (advertising area). The shelves are stacked in from above.
corrugated.display.palletView template
Pallet display shelf
Stackable corrugated shelf: base with raised rims, open corners and a low front lip as price rail. Dimensions: inside cross-section of the shell × shelf height.
corrugated.display.pallet.shelfView template
Egg carton with hole-deck insert
Folding carton tray with glued corners, hinged lid and an integrated hole deck for 6, 10 or 12 eggs. The construction uses a hole deck rather than molded pulp cups. Check egg size, retention and transport on a filled sample.
carton.eggView template
Gable-top beverage carton (print mock-up)
Milk-carton shape with a glued longitudinal seam, tuck bottom, triangular gable folds and a glueable top strip. The template is a print layout and dieline made from folding carton board. It is not designed as liquid-tight or aseptic packaging.
carton.gable.topView template
Cake box
Box for cakes and tarts with a tuck bottom, a split lid of two roof halves and a carry handle made of two handle panels with handle holes; optional window in the lid halves or in the front. Starting material E-flute microflute, start sizes for cakes Ø 24, 26 and 28 cm.
carton.cakeView template
Shelf display (shelf-ready tray)
Shipping and shelf packaging in one: tray with four walls of equal height and glued corners, a U-shaped tear-off perforation with a thumb notch in the front wall. After tearing off, a low front and side lands remain; optional header on the back wall (straight, rounded or arched). Starting material B-flute.
carton.display.shelfView template
Polygon box (n-gon)
Folding carton with 5 to 12 walls as a generalization of the hexagon box: glue flap, tuck lid at the front with the tuck flap opposite, straight or reverse bottom, mitered dust flaps. Length × width is the rectangle the n-gon fills.
carton.polygonView template
Trapezoid box
Folding carton with an isosceles trapezoid plan: wide front, narrower back, slanted sides; tuck lid at the front with the tuck flap at the back, straight or reverse bottom. Dimensions: front × depth × height.
carton.trapezoidView template
Pyramid
Pyramid with 3 to 8 triangular faces as a fan around the apex, glue flap, bottom with tuck flap and dust flaps on the other faces. Dimensions: base length × width, apex height above the bottom.
carton.pyramidView template
Sphere box
Sphere or ball box as a polyhedron of meridian strips: equator walls, zone faces with glue flaps above and below, a lid at the top and a bottom with tuck flap, dust flaps on the other strips. Dimensions: diameter at the equator (length = width) and height.
carton.sphereView template
Archive box – base
Base of the archive box: corrugated half slotted container, open at the top, four bottom flaps like the slotted box, a handle hole (slot) in both end walls.
corrugated.archive.baseView template
Archive box – lid
Telescope lid of the archive box: shallow tray of bottom and four walls with glued corner flaps; in the assembly sized from the outside dimensions of the base plus clearance per side.
corrugated.archive.lidView template
Telescope box (folding carton)
Base and telescope lid in folding boxboard form one assembly. Both parts have glued corner flaps; the lid follows the outside dimensions of the base plus clearance per side. For gift and chocolate boxes.
carton.telescopeView template
Archive box with lid
Archive and storage box in corrugated board with matching base and telescope lid. The base is open at the top and has hand holes in both end walls. Clearance per side and lid height determine the fit; the starting dimensions suit A4 documents.
corrugated.archiveView template
Cup carrier with divider
Cup carrier and slotted divider form one assembly. The carrier has two hole decks and a carrying handle; the crossed strips also separate cups below the decks. The divider follows the internal space and cell count of the carrier.
carrier.cup.dividerView template
Bottle carrier with divider
Bottle carrier for 4 or 6 bottles with a matching slotted divider. Two hole decks and the carrying handle hold the bottles in the carrier; additional strips also separate them below. The divider is derived from the internal space and selected bottle count.
carrier.bottle.dividerView template
Pallet display with shelves
Corrugated shell with a shelf opening, plinth and header, plus matching shelves with price rails. The identical shelves stack in from above. The selected count and shell dimensions together determine the height and fit of the individual levels.
corrugated.display.pallet.shelvesView templateNo matching template. Change the search or application.
Your product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app