JetDieline
Straight tuck-end carton
Blank, creases, and flaps are calculated from inside dimensions. The result is an artwork PDF, production dieline, and production sheet for the print shop.
carton.tuckend.straightView templateJETDIELINE / Templates
Templates
Find the shape that fits your product. Compare constructions, closures and dimension references — from folding cartons to gift packaging with several components.
113Constructions, components and assemblies
Individual components are shown separately. Different sizes and stored template versions are not additional packaging shapes.
corrugated.mailerExplore by packaging shape or application
Reverse tuck-end carton
The top tuck flap is attached to the front, the bottom one to the back. The reverse tuck end carton calculates its walls, dust flaps, and closures from the inside dimension. The dieline shown comes from Version 3 with the hanging hole disabled; artwork, production dieline, and report can be exported together in the technical core.
carton.tuckend.reverseView template
Regular slotted container
The regular slotted container connects four walls, a glue flap, and four flaps each at the top and bottom. Its outer flaps meet in the middle; the reference is similar to FEFCO 0201.
corrugated.rscView templateMailer box
Shipping box with tuck lid and dust flaps made from E flute or microflute. Inside printing, double walls, and size series are part of the same construction.
corrugated.mailerView template
Sleeve
The sleeve surrounds a product with four walls and remains open at both ends. Length and width describe the cross section; height denotes sleeve length. The dieline shows version 1 with finger notches on the front. Material thickness, glue flap, and notch position remain part of the calculation rather than simple scaling.
carton.sleeveView template
Folding tray with locking corners
An open corrugated tray with double end walls and locking corners. The blank is erected without adhesive; this page shows our own V2 construction with B flute.
corrugated.trayView template
Folding carton with crash-lock bottom
The pre-glued crash-lock bottom closes as the body is erected. Dust flaps and a tuck flap close the top of the folding carton; bottom gluing is part of the production workflow.
carton.crashlockView template
Folding carton with snap-lock bottom
The snap-lock bottom closes with four interlocking flaps. Two side flaps lie inside; a tab at the back tucks under the tongue of the front flap. Version 1 combines this bottom with a tuck lid. The calculated example uses folding carton board 400 g/m² and shows the flat dieline with creases and bottom slits.
carton.snaplockView template
Telescope box – base
Base and lid form a two-part corrugated construction with glued corner flaps. Each component has its own dieline; the lid is derived from the base's outside dimension and clearance per side.
corrugated.telescope.baseView template
Telescope box – lid
Corrugated lift-off lid with the same construction as the base; its dimensions follow the outside dimensions of the base plus clearance per side.
corrugated.telescope.lidView template
Rectangular label
Rectangular label with selectable corner radius; dieline with bleed and safety zone from the production profile.
label.rectView template
Wraparound label
Wrap label for cylindrical bottles and cans: length from circumference (or diameter) plus overlap; the front viewing area and overlap are marked as annotation lines.
label.wrapView template
Neck label
Neck label for a conical bottle neck as a conical blank from top and bottom diameter and height; as a closed ring with overlap or a partial label.
label.neckView template
Wraparound label for tapered cups
Wrap label for tapered cups and cans as a cone blank (annular sector) with a constant-width glue strip.
label.tapered.wrapView template
Label sheet
Sheet with multiple identical labels in columns and rows; the labels are kiss-cut, and the liner remains intact.
label.sheet.layoutView template
Paper band
Paper wrap band around a round body or a stack: length from circumference plus ease allowance and overlap; the overlap at the beginning is the glue area.
band.wrapView template
Belly band for boxes
Paper belly band around the four walls of a box, with creases at the edges and a glue flap; crease-to-crease dimensions from the box's outside dimensions plus material thickness.
band.bellyView template
Lid and base box – base (grayboard)
Greyboard shell for the base of a rigid box: base with four walls, V-grooves, and butt-jointed corners.
rigid.lidbase.baseView template
Lid and base box – lid (grayboard)
Greyboard shell for the lid, constructed in the same way as the base; dimensions derived from the outside dimensions of the base plus clearance and paper.
rigid.lidbase.lidView template
Lid and base box – base wrap
Wrapping paper for the base: a cross with corner flaps on the front and back walls and turn-ins over the top edge to the inside.
rigid.lidbase.base.wrapView template
Lid and base box – lid wrap
Wrapping paper for the lid, constructed in the same way as the base wrap.
rigid.lidbase.lid.wrapView template
Drawer box – tray (grayboard)
Greyboard tray: shell with V-grooves and butt-jointed corners, optionally with a slot for a pull ribbon in the right end wall.
rigid.drawer.trayView template
Drawer box – sleeve (grayboard)
Greyboard sleeve: strip with three V-grooves, open at both ends, with a joint at the lower front edge.
rigid.drawer.sleeveView template
Drawer box – tray wrap
Wrapping paper for the tray: cross-shaped blank with corner flaps and turn-ins, optionally with a slot over the tray's slot.
rigid.drawer.tray.wrapView template
Drawer box – sleeve wrap
Wrapping paper for the sleeve: strip with overlap at the joint and turn-ins at both open ends.
rigid.drawer.sleeve.wrapView template
Magnetic closure box – tray (grayboard)
Grayboard tray with V-grooves and butt-jointed corners, with a round magnet recess centered in the front wall.
rigid.magnetic.trayView template
Magnetic closure box – tray wrap
Wrapping paper for the tray: cross with corner flaps and turn-ins; covers the magnet in the front wall.
rigid.magnetic.tray.wrapView template
Magnetic closure box – case (grayboard)
Grayboard hinged-lid case: bottom, spine with spine allowance, lid, and front flap in one strip with V-grooves, round magnet recess in the flap.
rigid.magnetic.coverView template
Magnetic closure box – case wrap
Wrapping paper for the case: surface with turn-ins all around, corner cuts at 45°, and creases at hinge positions.
rigid.magnetic.cover.wrapView template
Magnetic closure box – inside lining
Lining paper for the inside of the case, smaller by the margin all around; covers the turn-ins and the flap's magnet.
rigid.magnetic.cover.liningView template
Neck box – base (grayboard)
Grayboard shell for the neck box base: bottom with four walls, V-grooves, butt-jointed corners.
rigid.neck.baseView template
Neck box – base wrap
Wrap paper for the neck box base: cross shape with corner flaps and turn-ins over the top edge and inward.
rigid.neck.base.wrapView template
Neck box – neck (grayboard)
Grayboard neck: continuous strip with three V-grooves, joint at the back right corner; sits in the base and protrudes above it by the neck height.
rigid.neck.neckView template
Neck box – neck wrap
Wrap paper for the neck: strip with overlap at the joint and turn-ins at the top edge covering the inside down to the bottom.
rigid.neck.neck.wrapView template
Neck box – lid (grayboard)
Grayboard shell for the neck box lid; dimensions derived from the base's inside dimensions plus clearance, height from neck height plus clearance.
rigid.neck.lidView template
Neck box – lid wrap
Wrap paper for the neck box lid, using the same construction as the base wrap.
rigid.neck.lid.wrapView template
Wrap for can or tube
Calculate the wrap from diameter or circumference, height, and overlap. Slit turn-ins are added for a cardboard tube; for a can, you can disable both. The drawing shows the blank with starting values, not a finished can or confirmed fit.
tube.wrapView template
Lid or base disc with tabs
The lid or base disc has glue flaps around a circular crease line. The starting dimensions are the inside diameter of the tube wall and its height. The parametric dieline shows the disc as an individual component; check a matching tube wall and assembly separately.
tube.discView template
Cone wall for cups
Calculate the conical sidewall blank of a paperboard cup from rim diameter, bottom diameter, and finished height. The annular sector includes the glue seam and separate allowances for the bottom curl and top rolled rim.
cone.cup.wrapView template
Flat bag
The flat bag consists of front and back with two glued side seams and a bottom fold. Enter bag width and height as outside dimensions. An optional flap on the back closes the opening; the dieline shows its effect on the paper blank.
bag.flatView template
Gusseted bag with block bottom
The side-gusset bag has a glued longitudinal seam and a block bottom made of flaps, ears, and triangles. You set bag width, gusset depth, and height. The inside dimension shown is converted into crease-to-crease dimensions using the material profile; the flat dieline also includes the bottom overlap.
bag.gussetView template
Tray with glued corners
A base, four walls, and glued corners form the open folding tray. This page shows V2 with an optional window; the window remains disabled in the starting example.
carton.tray.gluedView template
Tray with locking corners
Unglued folding carton board tray: front and back walls with corner flaps, double end walls with a rollover; tabs on the inner wall tuck into slots in the bottom.
carton.tray.lockedView template
Dispenser carton with tear-out window
Reverse tuck end carton with a perforated tear-open window in the front and a thumb notch as an opening tab; after opening, contents are removed individually.
carton.dispenserView template
Counter display
Open countertop display: low front wall with a finger recess, tall back wall with an advertising area, and sloping side walls; corners are glued inside with corner glue flaps as on the tray.
carton.display.counterView template
Pillow box
The pillow box curves two wall surfaces between lens-shaped end flaps. Curved creases create the closure instead of straight lid creases. In version 1, the inputs mean the package's width × thickness × length. The shown dieline accounts for these proportions and the starting material; it does not define a rectangular box interior.
carton.pillowView template
Hinged-lid carton
The hinged lid sits on the back wall and lays its front wall over the outside of the front. A lid flap inserts through a slot in the front; a tuck bottom closes the base. The page shows version 2 with the hanging hole disabled. The technical core calculates lid overhang, flaps, and creases from the chosen dimensions and material profile.
carton.hinged.lidView template
Tuck-end carton with window
The window carton combines straight tuck closures with a front cutout. Choose a rectangle with corner radius or an oval and leave room for the film margin and bridges. The shown version 2 starts with a rectangular window and no hanging hole. The dieline provides the construction; window film is patched separately on the inside.
carton.windowView template
Hexagonal carton
Six walls form a hexagonal footprint with a tuck lid and bottom. Inputs mean across corners × across flats × height, rather than the length and width of a rectangle. Version 1 calculates the angled walls, miters, and creases from these dimensions. The example shows the straight lid style; alternatively, the bottom can be attached to the back.
carton.hexagonView template
Gable box with handle
The gable carton combines a tuck bottom with a gable roof and glued handle flaps. The page explicitly shows version 1 with handle hole, roof panels, and gussets. The entered height describes the body; gable and handle are added using separate parameters. The calculated dieline is a basis for the folding sample, not proof of load capacity.
carton.gableView template
Half slotted container
Four walls with a glue flap and bottom flaps, open at the top: the half slotted container can serve as a shelf box or base. The own parametric construction calculates only this open box body.
corrugated.halfslottedView template
Full overlap slotted container
The outer flaps each cover the entire opening at the top and bottom and overlap. Our corrugated construction calculates full coverage rather than just a narrow overlap strip.
corrugated.rsc.fulloverlapView template
Self-seal shipping box
Corrugated shipping box with fully overlapping lid flaps, self-seal closure, and tear strip. The bottom is closed with tape as on a regular slotted box; the upper closure has adhesive strips and an opening aid.
corrugated.shipper.selfsealView template
Mailer with locking tabs
Corrugated mailer with double side walls and an external tuck closure. The lid's locking tabs engage through oblong slots in the front wall; the construction is erected without gluing.
corrugated.mailer.lockView template
Book wrap
Cross-shaped wraparound packaging for books and flat goods. Additional crease lines allow folds for thinner contents; end walls and lid end flaps close the sides, and an adhesive strip closes the front.
corrugated.wrapView template
Divider insert
Divider insert made of longitudinal and cross strips with interlocking slots to half their height. All strips lie on a shared sheet and remain connected by nicks until stripping.
corrugated.dividerView template
Insert pad
Flat insert pad used as a base, layer, or top pad in a box. The flat dimensions follow the box's inside space; side clearance makes the pad smaller. An optional grid creates identical rounded cut-outs.
corrugated.insert.padView template
Card sleeve
Flat sleeve for gift, loyalty, or greeting cards: front with a thumb cutout at the opening, back at the bottom crease, side seams formed by glue flaps, and an optional closure flap. Dimensions are the card's insertion dimensions; the sleeve grows with clearance and flaps.
card.sleeveView template
Presentation folder with pocket
Folder made from front and back covers with a spine and a pocket on the right, left, or both sides; pockets carry glue flaps on both sides, with optional business card slots. Dimensions refer to the finished size of the closed folder.
folder.pocketView template
Envelope with side flaps
Envelope or pocket envelope comprising address panel, two side flaps, bottom flap as the back, and closure flap. Dimensions are the finished size; the opening is at the top edge.
envelope.pocketView template
Carrier bag with gussets
Paper carrier bag comprising front, back, and two side gussets with a longitudinal seam, block bottom, top turn-in as handle reinforcement, and die-cut handle holes; dimensions: bag width × gusset depth × height. Bottom insert and handles are separate parts.
bag.carrierView template
Custom shape with creases
Blank from your own closed contour (point list, e.g., from an SVG file) with a uniform corner radius and up to four crease lines between contour points; panels are derived from the crease lines.
custom.polygonView template
Pizza box
The pizza box is formed from one blank with double side walls, locking corners, and a hinged lid. Inside dimensions determine the space for the pizza; ventilation slots and locking tabs are separate parameters.
carton.pizzaView template
Hinged-lid tray (clamshell)
The clamshell tray combines a base with glued corners and a lid hinged to the back wall. You choose a tuck flap or tab-and-slot closure and calculate either from inside or outside dimensions.
carton.tray.hingedView template
Takeout box
The takeout box has outward-sloping front and back walls, glued corners, and a folding lid with a tuck flap. Inside width and outside width have different reference points.
carton.takeoutView template
Cup sleeve
The cup sleeve is an annular sector with a glue flap for an existing tapered cup. You measure the diameters at the top and bottom edges of the sleeve and its vertical height.
sleeve.cupView template
Fries scoop
The French fry scoop remains open at the top and has a taller back wall, a lower front, and downward-sloping sides. Front width, depth, and back wall height form the inside dimensions; front height is a separate parameter.
carton.friesView template
Popcorn box
The popcorn box is open at the top and has four outward-sloping walls, a side seam, and a glued bottom. Length and width describe the top opening; the bottom is smaller.
carton.popcornView template
Sandwich wedge
The sandwich wedge forms a triangular prism from a bottom and two sloping sides, a glued-in back, and a hinged lid. Inside dimensions describe baseline, prism thickness, and triangle height.
carton.wedgeView template
Wallet envelope with side flaps
Envelope with an opening on the long side: address panel, two side flaps, bottom flap as the back, and a straight or pointed closure flap. Dimensions refer to the finished size; starting sizes DL, C6, C5, C4, and US No. 10.
envelope.walletView template
CD sleeve
Flat sleeve for a CD or DVD with a round window (optionally without), side seams formed by glue flaps, a closure flap on the back, and an optional thumb notch. Dimensions refer to the insert; clearance and flaps make the sleeve larger.
envelope.cdView template
Folded card
Folded card with a single fold (two panels), roll fold (three panels, with a slightly narrower inner flap), or gate fold (center with two wings). Dimensions refer to the folded finished size.
card.foldView template
Header Card
Header card folded over a bag's edge and stapled or glued, with a hanging hole through both layers (Euro slot, round hole, or slot). Dimensions are the folded final format.
card.headerView template
Gift card holder
Folded card or single card with four corner slots (corner pockets) or two side slots for a credit-card-size gift card of 85.6 × 54 mm; optional header with hanging hole.
card.giftholderView template
Overlap slotted container
An adjustable strip connects the outer flaps at the top and bottom. The template calculates flap lengths, material layers, and blank from box dimensions and the desired overlap.
corrugated.rsc.overlap.outerView template
Slotted container with meeting inner flaps
The inner flaps meet in the center and close the opening. Outer flaps with an adjustable gap sit above them; our construction calculates both flap layers together.
corrugated.rsc.innerfullView template
Slotted container with snap-lock bottom
A snap-lock bottom closes this corrugated box without tape at the bottom. The top is selected separately: meeting flaps, fully overlapping flaps, or open.
corrugated.rsc.mixedView template
Carry box with hand hole
Corrugated carry-handle box with a snap-lock bottom. Two fully overlapping lid flaps have aligned handle cutouts and are glued over their full area; an additional handle is not part of the construction.
corrugated.handleView template
Mailer with closure flap
Mailer with double side walls and an external closure flap. A self-adhesive strip connects the flap to the front wall; a tear strip opens it. The bottom locking tabs still hold the wall structure.
corrugated.mailer.flapView template
Corrugated sheet with creases
Rectangular corrugated sheet with zero to three evenly spaced creases. Without creases, it serves as a flat layer pad; folded, it forms an angle, U-profile, or wrap around a product.
corrugated.sheetView template
Slide sleeve
Corrugated sliding sleeve with glue flap and open ends. Thumb notches at both ends of the top make it easier to push out an inner part. The template calculates the sleeve only.
corrugated.slideView template
Slotted container with crash-lock bottom
The corrugated box is preglued at the factory and supplied flat. The crash-lock bottom closes during erection; the top can have meeting flaps, fully overlapping flaps, or an open edge.
corrugated.autobottomView template
Flat pouch (3-side seal)
This template calculates the print mask for a flat pouch with a three-side seal. Front and back share one print sheet with a bottom fold. Side and top seams are seal zones; optional additions include a zipper, tear notch, and hanging hole. The drawing is not an approved die-cutting contour for film.
pouch.flatView template
Stand-up pouch (Doypack)
The stand-up pouch receives a print mask comprising the front, inserted W-shaped bottom gusset, and back. Side seam, top seam, Doyen corners, and zipper band remain documented as seal zones. Pouch width and height are outside dimensions; the bottom gusset is a separate parameter. The calculated print sheet does not yet confirm standing stability.
pouch.standupView template
Spout pouch
The spout pouch print mask adds a sealed-in spout to the stand-up pouch. Choose the top right corner or the center of the top edge and enter the inside diameter. The spout's boat-shaped flange is part of the seal zones; the drawing documents its position, not confirmed component fit.
pouch.spoutView template
Drink pouch
The drink pouch template shows a stand-up bottom print mask with a marked straw puncture point on the front. The starting profile has a wider top seal than the simple stand-up variant. Width, height, bottom gusset, and puncture point are set separately; calculated fill volume is not part of the model.
pouch.drinkView template
Seal-end carton
Folding carton with a side seam and glued top and bottom closures (Seal End) in place of tuck flaps: outer flap at the front, inner flap at the back, dust flaps at the sides. For pharmaceuticals and food; opened by tearing.
carton.sealendView template
Tissue box
Horizontal box for facial tissues and handkerchiefs: body with side seam, ends with glued closures (Seal End), dispensing opening in the top as a perforation (slot or rectangle) with a thumb notch. Dimensions: length × top width × height.
carton.tissueView template
Insert with cutout
Paperboard insert for a box: a platform with a product cut-out (rectangle, circle, or oval, freely positioned) on folded legs at two or four edges, optionally with inward-folded leg flaps. Dimensions: outside dimensions of the insert (inside dimensions of the box) × platform height.
carton.insert.cutoutView template
Telescopic box (folding carton) – base
Lower part of the folding carton telescope box: base with four walls and glued corner flaps, same construction as the corrugated telescope box, for smaller gift and chocolate boxes.
carton.telescope.baseView template
Telescopic box (folding carton) – lid
Telescope lid made of folding carton board, with the same construction as the base; dimensions derived from the base's outside dimension plus clearance per side.
carton.telescope.lidView template
Cup carrier
One-piece folding carton carrier for 2 or 4 cups: base, front and back wall, two hole decks holding the cups and a double handle from the blank. Ends open.
carrier.cupView template
Bottle carrier
One-piece folding carton carrier for 4 or 6 bottles with two hole decks and a handle from the blank; with a divider as an assembly (carrier with divider), strips also separate the bottles below the deck.
carrier.bottleView template
Pallet display (shell)
Shell of a corrugated pallet display for a quarter or half pallet: tube of four walls with glue flap, large shelf opening in the front between plinth and top header (advertising area). The shelves are stacked in from above.
corrugated.display.palletView template
Pallet display shelf
Stackable corrugated shelf: base with raised rims, open corners and a low front lip as price rail. Dimensions: inside cross-section of the shell × shelf height.
corrugated.display.pallet.shelfView template
Egg carton with hole-deck insert
Folding carton tray with glued corners, hinged lid and an integrated hole deck for 6, 10 or 12 eggs. The construction uses a hole deck rather than molded pulp cups. Check egg size, retention and transport on a filled sample.
carton.eggView template
Gable-top beverage carton (print mock-up)
Milk-carton shape with a glued longitudinal seam, tuck bottom, triangular gable folds and a glueable top strip. The template is a print layout and dieline made from folding carton board. It is not designed as liquid-tight or aseptic packaging.
carton.gable.topView template
Cake box
Box for cakes and tarts with a tuck bottom, a split lid of two roof halves and a carry handle made of two handle panels with handle holes; optional window in the lid halves or in the front. Starting material E-flute microflute, start sizes for cakes Ø 24, 26 and 28 cm.
carton.cakeView template
Shelf display (shelf-ready tray)
Shipping and shelf packaging in one: tray with four walls of equal height and glued corners, a U-shaped tear-off perforation with a thumb notch in the front wall. After tearing off, a low front and side lands remain; optional header on the back wall (straight, rounded or arched). Starting material B-flute.
carton.display.shelfView template
Polygon box (n-gon)
Folding carton with 5 to 12 walls as a generalization of the hexagon box: glue flap, tuck lid at the front with the tuck flap opposite, straight or reverse bottom, mitered dust flaps. Length × width is the rectangle the n-gon fills.
carton.polygonView template
Trapezoid box
Folding carton with an isosceles trapezoid plan: wide front, narrower back, slanted sides; tuck lid at the front with the tuck flap at the back, straight or reverse bottom. Dimensions: front × depth × height.
carton.trapezoidView template
Pyramid
Pyramid with 3 to 8 triangular faces as a fan around the apex, glue flap, bottom with tuck flap and dust flaps on the other faces. Dimensions: base length × width, apex height above the bottom.
carton.pyramidView template
Sphere box
Sphere or ball box as a polyhedron of meridian strips: equator walls, zone faces with glue flaps above and below, a lid at the top and a bottom with tuck flap, dust flaps on the other strips. Dimensions: diameter at the equator (length = width) and height.
carton.sphereView template
Archive box – base
Base of the archive box: corrugated half slotted container, open at the top, four bottom flaps like the slotted box, a handle hole (slot) in both end walls.
corrugated.archive.baseView template
Archive box – lid
Telescope lid of the archive box: shallow tray of bottom and four walls with glued corner flaps; in the assembly sized from the outside dimensions of the base plus clearance per side.
corrugated.archive.lidView template
Telescope box (folding carton)
Base and telescope lid in folding boxboard form one assembly. Both parts have glued corner flaps; the lid follows the outside dimensions of the base plus clearance per side. For gift and chocolate boxes.
carton.telescopeView template
Archive box with lid
Archive and storage box in corrugated board with matching base and telescope lid. The base is open at the top and has hand holes in both end walls. Clearance per side and lid height determine the fit; the starting dimensions suit A4 documents.
corrugated.archiveView template
Cup carrier with divider
Cup carrier and slotted divider form one assembly. The carrier has two hole decks and a carrying handle; the crossed strips also separate cups below the decks. The divider follows the internal space and cell count of the carrier.
carrier.cup.dividerView template
Bottle carrier with divider
Bottle carrier for 4 or 6 bottles with a matching slotted divider. Two hole decks and the carrying handle hold the bottles in the carrier; additional strips also separate them below. The divider is derived from the internal space and selected bottle count.
carrier.bottle.dividerView template
Pallet display with shelves
Corrugated shell with a shelf opening, plinth and header, plus matching shelves with price rails. The identical shelves stack in from above. The selected count and shell dimensions together determine the height and fit of the individual levels.
corrugated.display.pallet.shelvesView templateNo matching template. Change your search or application.
Your product. Your dimensions. Your design.
With JetDieline, choose a suitable template, adjust its size, and place text, logos, and images directly on your packaging.
Try your dimensions
Ask about the app